***Schrick M54 Cams***

[RENNsport]

Specs are 264 intake and 248 exhaust. Gains are ~ 15-20HP/ft.lbs.

On special for $1095...please email sales@rennsport.com to place an order.

Thank you :)

<img src="http://63.249.202.221/images/schrick_cams.jpg">

[///ACS-3]

What about cams for E46 323/328 M52TU ?

And what's the difference between Shrick cams and Technik cams?

[RENNsport]

What about cams for E46 323/328 M52TU ?

And what's the difference between Shrick cams and Technik cams?

These cams will fit all E46 323/325/328/330. Technik cams are more aggressive in profile, better suited for built NA motors.

[NickACS]

Either better than the other for FI models, Schrick or Technik? :)

[///ACS-3]

These cams will fit all E46 323/325/328/330. Technik cams are more aggressive in profile, better suited for built NA motors.What do you mean by "built NA motors" ?

Thanks.

[RENNsport]

Go with Schrick.

Built NA motors as in headers, ported head, larger valves, stiffer valve springs, pistons, rods........

[chmdrm]

Dyno runs with either (M52tu would be nice)?

[MrMotorwerk]

How do you get the Dual Vanos timing right with these cams. Cause if you cant setup the Vanos timing the car goes into limp mode (performance shut down).

Installation Secret?

[samir@technik]

How do you get the Dual Vanos timing right with these cams. Cause if you cant setup the Vanos timing the car goes into limp mode (performance shut down).

Installation Secret?

You need to acquire the factory tools to perform the install correctly:

11 2 300
11 4 220
11 3 450
11 6 170
11 3 240
11 6 150

Or we can rent them out to you. You also need access to the TIS.

[malakia12]

damn, if this is still going on when I return from my F1 Indy trip, I am def. picking up a set. need them to complete my NA mods.

[Mpower619]

Im interested. I will be porting my head and puting bigger valves and stiffer springs but nothing to the bottom end. Can I still do this with these cams.. I was about to start a group buy for CAMS...

[NickACS]

Samir-
How long is the special price going for? I'm *very* interested, but need to talk to AA about it on Monday for my application...Thanks!

[samir@technik]

mpower: These cams will work fine with the mods you are planning.

nick: This special will last till end of next week.

[Mpower619]

Ok, where do I sign up? I am alover this deal... :)

[malakia12]

mpower: These cams will work fine with the mods you are planning.

nick: This special will last till end of next week.

damn looks like i can't wait til i come back from indy. i guess i will be calling monday to order mine :thumbup:

[malakia12]

by the way, is there a wait on these like there was with the headers, or do they ship out right after the payment is made? just wondering, the sooner the better :)

[samir@technik]

by the way, is there a wait on these like there was with the headers, or do they ship out right after the payment is made? just wondering, the sooner the better :)

We have a limited number in stock, ready to ship.

[NickACS]

Talked with AA today and they do not recommend the cams for my Step :( Looks like headers could be a possibility in the future whenever AA gets the sensors done..

Thanks for your help Samir!

[RichP]

Bump for cams!

Nick: AA gets the sensors done? Wow...they come up with just about anything..

[malakia12]

ordered mine today, thanks a million Rennsport