Technik has Spoken- SK2 Available Soon!

[omes]

http://www.rennsport.com/forums/showthread.php?threadid=2978

:thumbup: :pimpin: :woot:

[yafool]

Oh my goodness. YES YES YES!!!!! My car is at renn right now getting the sk1 install. I hope its not too expensive!

[Nt_loader]

I should have read the post first

[djyoungz]

i really hope the kit is complete sooon......thank god.....

[Cali6869]

nice.... I cant wait till I save some money and get my asa .

[greg330i]

from the Simpson's Comic-Book guy- "There is no emoticon for what I'm feeling about this!@!!"

I can't wait for the software and injectors!!


Dumbest question in the world.. Samir said MS42 and MS43 equipped cars. Does my 2001 E46 330i fall into that category?
For some reason, I thought I had an M54 engine.

Thanks,
-Greg

[BMWDon]

You do, it's the model # for the DME (computer) that controls your engine, MS43 runs the M54, MS42 runs the M52TU

[BlueCuban325i]

Any word on price? How about a group buy?? :thumbup:

[samir@technik]

The SK2 ECU/Injector upgrade will cost $995. We will have an intro special price for existing SK1 customers.

ASA will be implementing some product/price changes beginning July 1st:

The SK1 kit will now cost $5995 (same as AA), and will generate 280HP+ for the 325 and 340HP+ for the 330.

The SK2 kit will cost $6990 and will generate 300HP+ on the 325 and 360HP+ on the 330.

NOTE: All HP figures are at the crank.

[HighBoostin330]

The SK2 ECU/Injector upgrade will cost $995. We will have an intro special price for existing SK1 customers.

ASA will be implementing some product/price changes beginning July 1st:

They will be releasing a new SK+ kit, which will not have an intercooler. This kit will cost $5295 and will generate 250HP+ for the 325 and 300HP+ for the 330.

The SK1 kit will now cost $5995 (same as AA), and will generate 280HP+ for the 325 and 340HP+ for the 330.

The SK2 kit will cost $6990 and will generate 300HP+ on the 325 and 360HP+ on the 330.

NOTE: All HP figures are at the crank.

Samir, so I guess that us steptronic owners are stuck with only the SKI right?

[samir@technik]

Unfortunately, I would have to say yes.

[Nt_loader]

Will this new upgrade include an 8 PSI pulley? If not, can one be purchased? And what would the HP gains be with it?

Cant wait to get all these goodies :thumbup:

[yafool]

What about 325s? I thought that it would be for all ms43.

[HighBoostin330]

Unfortunately, I would have to say yes.

:cry: :bawling: Can us steptronic owners get the software at least???

[BlueCuban325i]

Unfortunately, I would have to say yes.

So we step owners can't get the ECU/Injector upgrades?

[epeart]

The SK2 ECU/Injector upgrade will cost $995. We will have an intro special price for existing SK1 customers.

ASA will be implementing some product/price changes beginning July 1st:

They will be releasing a new SK+ kit, which will not have an intercooler. This kit will cost $4995 and will generate 250HP+ for the 325 and 300HP+ for the 330.

The SK1 kit will now cost $5995 (same as AA), and will generate 280HP+ for the 325 and 340HP+ for the 330.

The SK2 kit will cost $6990 and will generate 300HP+ on the 325 and 360HP+ on the 330.

NOTE: All HP figures are at the crank.NICE :thumbup: :thumbup: :thumbup: When can we start to order?

[Nt_loader]

Once we get the software, do we still need the ASA tronic?

Are we going to need the bell fuel pressure regulator with the larger injectors?

[Durgesh]

Once we get the software, do we still need the ASA tronic?

Are we going to need the bell fuel pressure regulator with the larger injectors?

Yup good question. :thumbup: ...... :dunno:

Durgesh

[Alan L.]

:thumbup:

[Mr Paddle.Shift]

ASAtronic most likely not needed. Remember it's just a potentiometer. A reprogrammed ECU should take care of this.

FWIG, Bell FPR is for better and finer tuning of fuel map. Good to upgrade, probably not a must. :P


Once we get the software, do we still need the ASA tronic?

Are we going to need the bell fuel pressure regulator with the larger injectors?

[greg330i]

Will this new upgrade include an 8 PSI pulley? If not, can one be purchased? And what would the HP gains be with it?

Cant wait to get all these goodies :thumbup:

From what I understand, the pulley is the same SK1 or SK2. The extra 1.5psi of boost is generated only by the increased redline given by the software.
-Greg

[Nico3k]

That is awesome! SK2 yay! Too bad the SK1 price has to go up to same as AA :(

Since AA already comes with injectors and software, wouldn't AA be a better deal than the ASA one?

Which one makes more power?
Also, how much will an upgrade cost from SK+ to SK2 ? Is it even possible to upgrade, or do you have to buy the whole SK2 kit? Does SK+ use a different compressor, or is it just a lower boost pulley with no intercooler?

Thanks!

[greg330i]

That is awesome! SK2 yay! Too bad the SK1 price has to go up to same as AA :(

Since AA already comes with injectors and software, wouldn't AA be a better deal than the ASA one?

Which one makes more power?
Also, how much will an upgrade cost from SK+ to SK2 ? Is it even possible to upgrade, or do you have to buy the whole SK2 kit? Does SK+ use a different compressor, or is it just a lower boost pulley with no intercooler?

Thanks!

They should keep the SK1 same price and make the SK2 around AA's price. ASA is definitely better (IMHO), so they'd blow them out of the water. I bet if that happened, nobody in their right mind would buy an AA kit for their E46,

But alas, Rennsport either needs to recoupe come R&D expenses, or just wanna make more money. The American dream.. build the better mousetrap, etc.

[///Mike GmbH]

with The SK2 ECU/Injector upgrade, how much additional HP can we get from the SKI kit? a before/after DYNO graph showing the differences would be great!

[greg330i]

with The SK2 ECU/Injector upgrade, how much additional HP can we get from the SKI kit? a before/after DYNO graph showing the differences would be great!

Also, Previously, Samir had mentioned that SK2 would get a different blower. That seems to no longer be the case.

[samir@technik]

Will this new upgrade include an 8 PSI pulley? If not, can one be purchased? And what would the HP gains be with it?

Cant wait to get all these goodies :thumbup:

We still haven't decided whether to up the boost via pulley or redline, we'll figure this out once we start tuning the cars.

(The pulley method will cost more)

[samir@technik]

What about 325s? I thought that it would be for all ms43.

Yes, all MS43s...but not Steptronics.

[samir@technik]

:cry: :bawling: Can us steptronic owners get the software at least???

Yes, this will be possible, but boost pressure will be unchanged.

[samir@technik]

NICE :thumbup: :thumbup: :thumbup: When can we start to order?

Dyno came last week. Just waiting on the rest of the components to arrive, so we can assemble everything. I'm guessing end of June we should be ready.

<img src="http://63.249.202.221/images/dyno.jpg">

[samir@technik]

Once we get the software, do we still need the ASA tronic?

Are we going to need the bell fuel pressure regulator with the larger injectors?

Nope, FPR and ASAtronic are not necessary.

[m3on20z]

Thanks man for the info...:thumbup:

[Nt_loader]

Thanks for the replies :thumbup:

Cant wait to get all the new goodies installed.

[yafool]

Ah, that a relief. So with the software, we wont have to worry about any fault codes and such, yea?
How much would it be just for the software?

Got my first SES light today. Yellow has been bugging me :hmm:



Yes, this will be possible, but boost pressure will be unchanged.

[samir@technik]

CELs in the beginning are pretty common since the ECU is re-adjusting the fuel/ignition maps. The important thing is to break in the compressor for 100-150 miles, then drive the car hard.

[dtyau]

What about 328is without step, but with regular autos?

Yes, all MS43s...but not Steptronics.

[Alan L.]

Can't wait :)

Samir is the man :bow:

Alan

[HighBoostin330]

This is a noobie question, but can I use my UUC Underdrive Pullies with the ASA system??? :dunno:

[Durgesh]

This is a noobie question, but can I use my UUC Underdrive Pullies with the ASA system??? :dunno:

Last I heard, its not recomended... and please don't ask me why. :dunno:

Durgesh

[HighBoostin330]

DAMN IT!!! Now I have to sell the underdrive pullies crap! :banghead: :banghead: :bawling: :bawling: :bawling:

[Durgesh]

DAMN IT!!! Now I have to sell the underdrive pullies crap! :banghead: :banghead: :bawling: :bawling: :bawling:

Before you do that, wait for Technik's input. :bow:

Durgesh

[samir@technik]

What about 328is without step, but with regular autos?

All autos will be limited to 6.5psi.

[samir@technik]

This is a noobie question, but can I use my UUC Underdrive Pullies with the ASA system??? :dunno:

You can only use the water pump pulley, the others will not work.

[HighBoostin330]

You can only use the water pump pulley, the others will not work.

THANK YOU SAMIR FOR THE GOOD NEWS!!! At least I can use one of them, hopefully there will be a belt that will fit this weird combination. :dunno:

[dtyau]

So how much horsepower can I get expect to get out of my 328i?
All autos will be limited to 6.5psi.

[wyu]

THANK YOU SAMIR FOR THE GOOD NEWS!!! At least I can use one of them, hopefully there will be a belt that will fit this weird combination. :dunno:


I'm running the RE water pump pully. :dunno:

[samir@technik]

THANK YOU SAMIR FOR THE GOOD NEWS!!! At least I can use one of them, hopefully there will be a belt that will fit this weird combination. :dunno:

The tensioner allows enough slack to run this pulley with the belt provided.

[samir@technik]

So how much horsepower can I get expect to get out of my 328i?

328s will put down about 310HP (crank) @ 6.5psi.

[HighBoostin330]

I'm running the RE water pump pully. :dunno:

I'm from San Francisco. Maybe I can get a ride in your ASA'ed car. :thumbup: Just so I can feel what I have been missing for the last two years.

[HighBoostin330]

328s will put down about 310HP (crank) @ 6.5psi.

So if I have have a STEP 330, then the most I can put down would be about 325HP at the crank with 6.5psi??

[samir@technik]

So if I have have a STEP 330, then the most I can put down would be about 325HP at the crank with 6.5psi??

Not necessarily...depends on how strong your motor is. We have some 330s putting out over 350HP.

[yafool]

350 crank or wheel? with stock internals? Technik, Have you done any ASAed 2.5 to a 3.0L? How well would that run?

Not necessarily...depends on how strong your motor is. We have some 330s putting out over 350HP.

[ACS3 A.R.T]

wow....i guess I beter pray I have a good engine. hehehehe.....Man, I want a sc!

[dronell19]

Samir - I have a question. My car is a 330i step. If I buy an SK1, what kind of software upgrade is provided? Would I need to send samples of gasoline from Indonesia? We have a 96-98 octane here but we are never sure if that's really it.

Simply put, what would be needed for me to purchase an SC system from you? The HP figure should be around 350HP (above post), right?

[greg330i]

Not necessarily...depends on how strong your motor is. We have some 330s putting out over 350HP.

I'd like to nominate my car and Crispvx's engines as strong, aka blessed from the factory :)
He's doin 300+ at the wheels with his SK1
I'm goin 209 (205.7 corrected) at the wheels without my supercharger)


Damm wife. :banghead: I make all the money, and it's... Have you paid off the house yet?... Have yougot enoug en your savings (like huge padding).. etc...

My reply has yet to come, but it will include the line.. uuhhhh, i already have the title to the car.....
</rant> end of rant, you shall hear no more until I have an order number from rennsport.

[kashif]

350 at the crank :yikes: :yikes:

is that safe for the step tranny?

[samir@technik]

350 crank or wheel? with stock internals? Technik, Have you done any ASAed 2.5 to a 3.0L? How well would that run?

Crank.

We have not increased displacement on a 2.5 before, but I see no reason why it wouldn't run well.

[samir@technik]

Samir - I have a question. My car is a 330i step. If I buy an SK1, what kind of software upgrade is provided? Would I need to send samples of gasoline from Indonesia? We have a 96-98 octane here but we are never sure if that's really it.

Simply put, what would be needed for me to purchase an SC system from you? The HP figure should be around 350HP (above post), right?

I can't sell you an SC system, because ASA has a SE Asia distributor. You should contact them directly.

For software, we might be able to help you out if you can send me your DME file.

[samir@technik]

350 at the crank :yikes: :yikes:

is that safe for the step tranny?

Yes.

[djyoungz]

what i'm wondering is if 350 hp is safe for the step tranny, why wouldn't step 323's and 325's be able to run 8psi's, dont 330's and 323's use the same step transmission?

[HighBoostin330]

Yes.

:woot:

[yafool]

Want a test car for that project? :)


Crank.

We have not increased displacement on a 2.5 before, but I see no reason why it wouldn't run well.

[yafool]

:lmao: :lmao: :lmao:

I'd like to nominate my car and Crispvx's engines as strong, aka blessed from the factory :)
He's doin 300+ at the wheels with his SK1
I'm goin 209 (205.7 corrected) at the wheels without my supercharger)


Damm wife. :banghead: I make all the money, and it's... Have you paid off the house yet?... Have yougot enoug en your savings (like huge padding).. etc...

My reply has yet to come, but it will include the line.. uuhhhh, i already have the title to the car.....
</rant> end of rant, you shall hear no more until I have an order number from rennsport.

[djyoungz]

what i'm wondering is if 350 hp is safe for the step tranny, why wouldn't step 323's and 325's be able to run 8psi's, dont 330's and 323's use the same step transmission?