PDA

View Full Version : Central Jersey DDE Install

Manny330
10-22-2004, 09:48 AM
so i just got my $150 dde along with remote from Jlevi and i have no clue how to install.. anybody know where i can get em installed.. better yet ill pay $70+lunch if they want to a local fanatic wholl install it for me.. im in south plainfield.. by edison, new brunswick..that area
AirBen
10-22-2004, 09:36 PM
If you wanna drive up to Queens I can do it. I've done about 10 DDE installs in the past few weeks.
steelblue46330i
10-22-2004, 10:07 PM
If you wanna drive up to Queens I can do it. I've done about 10 DDE installs in the past few weeks.

:bump: :bump: for a good guy to do your install. I can vouch for him since he did my install.
AirBen
10-22-2004, 10:09 PM
Hey Rich, got my car back finally :) HID fogs are sick btw.
steelblue46330i
10-22-2004, 10:11 PM
Hey Rich, got my car back finally :) HID fogs are sick btw.

You have "Aim" Ben.
AirBen
10-22-2004, 10:12 PM
You have "Aim" Ben.
bfny22
steelblue46330i
10-22-2004, 10:12 PM
You have "Aim" Ben.

Disregard the last post, saw that you do have AIM
Manny330
10-23-2004, 12:18 AM
:woot: ill hit you up on aim sometime so we can set it up
proveg
10-24-2004, 01:35 PM
:bump: for Good installer.
Did my halos install with remote kit
petey
10-24-2004, 05:49 PM
:bump: for Good installer.
Did my halos install with remote kit
:hi: ben did mine too...this should be a :bow: to ben thread
jstar41
10-24-2004, 10:11 PM
:hi: ben did mine too...this should be a :bow: to ben thread
he does them for free??

i installed the DDE Kit today.. next week i'll be doing the remote, any tips? I had a hard time removing the headlight covers.. but with a little patience and a screwdriver i accomplished installing it and the best part is that it works:craig:
BM-MAN
10-24-2004, 10:31 PM
he does them for free??

i installed the DDE Kit today.. next week i'll be doing the remote, any tips? I had a hard time removing the headlight covers.. but with a little patience and a screwdriver i accomplished installing it and the best part is that it works:craig:


Manny here's some tips.

I had went through hell trying to get the remote wire run down to the footwell area, that was because I was using the wrong hole. Make sure u use the hole toward the left of ECU down on the back. If you put a flash light inside the footwell where the hole is located you'll see it. Also I twisted some thicker wire and taped it to the (white) remote wire just to be able to feed it down there. which made it much EZer. once i got the wires there I just removed the thicker wire I used. Another thing I noticed is after doing the install, all but 1 ring lit up. I dissconnect the other ring next to it and it came on (wierd) I did this a few times during the install dont know why it was doing this. Also putting the key in the ignition made all rings light up. I think the relays need to sync somehow. After doing this a few times it was all good. Let me know if you guys have any questions. I have this down packed heheeh... Good luck. :thumbup:
Manny330
10-24-2004, 11:40 PM
hmm... ill take a look at everything tommorow and decide if i can take on this task,, thanks for the info bro
BM-MAN
10-25-2004, 06:46 AM
hmm... ill take a look at everything tommorow and decide if i can take on this task,, thanks for the info bro

Its not a bad install. It looks a little overwelming at first with all those cables from the harness but the pics and step by step install along with the tips I just gave u will make it a breeze. Let me know if you have any questions. :thumbup: Too bad I wont be here this weekend, could've met up with u.

PS one more thing. Hopefully you got the phospher balasts which was extra. They are better quality and have the connectors attached already and color coded. check with Jon.