PDA

View Full Version : AA SC question

als00328ci
05-17-2005, 03:27 PM
Hey Guys,

I just drove my newly SC'ed 328 with the AA kit and i noticed that my engine light is on and is complaining about the MAF sensor. Also after a couple minutes of driving, i notice that when i let off the gas, the rpm's drop so low and actually die. Has anyone heard of this problem.

TIA
Casanova
05-17-2005, 04:07 PM
I had MAF sensor problems before....mine was cause the intake pipe wasn't on right, not sure what problem you got but good luck.
als00328ci
05-17-2005, 04:42 PM
Which part of the intake pipe? I have the filter connected to the MAF sensor connected to the intake pipe to the U-pipe to the blower.

I had MAF sensor problems before....mine was cause the intake pipe wasn't on right, not sure what problem you got but good luck.
Casanova
05-17-2005, 09:05 PM
Which part of the intake pipe? I have the filter connected to the MAF sensor connected to the intake pipe to the U-pipe to the blower.

so you have:

filter=>maf sensor=>intake pipe=>u-pipe

I have:

filter=>intake pipe=>maf sensor=>u-pipe to blower.
TaZaM3
05-17-2005, 09:07 PM
If you have a lightweight flywheel that might be the cause. I have some idle/stall issues.
als00328ci
05-18-2005, 10:03 AM
Casanova --> I guess it does not really make that much difference wether the MAF is before or after the intake pipe. I checked on the aa site and the pic shows the pipe right before the "u". I took out my MAF and will try to find someone who will let me try it out on their stock car.

If you have a lightweight flywheel that might be the cause. I have some idle/stall issues.

TAZ --> Does your car stall very easily? I could be driving on the highway and if i put the car in neutral from 2500 rpm's the car would stall. Not very safe.