2003-2006 E46 330 Needed for SC Tuning (non-ZHP)

[mike@technik]

Now that we've completed our supercharged software program for the 330 ZHP platform, it's time to start on the non-ZHP application. For this, we need a 2003-2006 E46 330 to finalize the software program for the Stage 1 (6.5psi) and Stage 2 (8psi) kits (<i>this program will also eliminate the dip at 4000RPMs</i>).

We're offering a one-time special price of $3995 for Stage 1 and $4495 for Stage 2. This includes <u>free</u> installation and <u>free</u> software tuning (additional savings of over $1000). If you are interested in supercharging your 330 and would like to take advantage of this special opportunity, please contact me at mike@technikpower.com or feel free to send me a PM. We are located in Marina Del Rey (SoCal). :thumbup:

<b>Vehicle Requirements:</b>
-Must be a vehicle built after 03/03
-Must be equipped with a manual transmission
-Must be relatively stock in terms of engine mods (exhaust is ok...intake is ok as well, provided stock airbox is available)

<b>Estimated Gains:</b>
Stage 1 | 2003-2006 BMW E46 330i/Ci
-Power: 340HP @ 6500 RPMs
-Torque: 310FT.LBS @ 4750 RPMs
-Boost Pressure: 6.5psi

Stage 2 | 2003-2006 BMW E46 330i/Ci
-Power: 350HP @ 6500 RPMs
-Torque: 320FT.LBS @ 4750 RPMs
-Boost Pressure: 8psi

<b>Included Components for the kit:</b>
-ASA TM12 Centrifugal Compressor (TM15 for Stage 2)
-Hi-Capacity Front Mounted Air/Air Intercooler
-Siemens MS45.1 ECU Upgrade
-6 Hi-Flow Bosch Injectors
-Hyperboost HX Compact Bypass Valve
-ASA Air Filter

<img src="http://www.technikpower.com/temp/technik_060129_14b.jpg">

For reference, here is a dyno of our 8psi kit for the 330 ZHP...

<img src="http://www.technikpower.com/temp/zhpdyno.gif">

[netengwiz]

Damn, can't beat that! Nice work.

[MachRc]

some1 jump on this. I wish mine was a MY03:bawling:

[HighBoostin330]

:yikes: I was the former test mule for the MS43 software and I didn't even get that price. Plus, I had to buy extra upgrades like hoses, bypass valves, and oil return lines. Geez, I guess the newer kits are much better now. It features a lot of revised parts. I wish I had waited. :(

[2003330i]

:yikes: I was the former test mule for the MS43 software and I didn't even get that price. Plus, I had to buy extra upgrades like hoses, bypass valves, and oil return lines. Geez, I guess the newer kits are much better now. It features a lot of revised parts. I wish I had waited. :(

that sucks but i'm glad to hear that there is allot of revised parts that come with the new kits

[Yellowmann]

Wow that is a great deal... will you have this for a 323i steptronic? Someone jump on this ASAP....

[JCz04Bimmer]

Argh! So tempting to ship my car out there! :lmao:

[redronin]

^ do it. are you kidding me, if i was 03 id ship my car out there so fast....

[Yellowmann]

^ do it. are you kidding me, if i was 03 id ship my car out there so fast....

Yeah ditto that..... such a great deal... since your getting free install and software, that cover shipping :yikes:

[JCz04Bimmer]

I know I know. But shipping costs are SO much with gas prices being SO high. Maybe I'll talk to my g/f about taking a trip cross-country since we've always joked about it. My car is at about 39,000 miles and I'm almost done with my lease (I'm buying it out) so maybe its good timing. :hmm:

Mike, how long would the car be in the shop? Are we talking days or weeks? And, are these prices lower than your upcoming GB that I've seen you guys subtly dropping hints about? I obviously know that with this installation and tuning is free which is a major savings.

Thanks in advance.

[redronin]

I know I know. But shipping costs are SO much with gas prices being SO high. Maybe I'll talk to my g/f about taking a trip cross-country since we've always joked about it. My car is at about 39,000 miles and I'm almost done with my lease (I'm buying it out) so maybe its good timing. :hmm:

Mike, how long would the car be in the shop? Are we talking days or weeks? And, are these prices lower than your upcoming GB that I've seen you guys subtly dropping hints about? I obviously know that with this installation and tuning is free which is a major savings.

Thanks in advance.
this is not an install its a test bed. more likely in the month range as i understand it...

not a good idea if you dont have a backup car

[mike@technik]

I know I know. But shipping costs are SO much with gas prices being SO high. Maybe I'll talk to my g/f about taking a trip cross-country since we've always joked about it. My car is at about 39,000 miles and I'm almost done with my lease (I'm buying it out) so maybe its good timing. :hmm:

Mike, how long would the car be in the shop? Are we talking days or weeks? And, are these prices lower than your upcoming GB that I've seen you guys subtly dropping hints about? I obviously know that with this installation and tuning is free which is a major savings.

Thanks in advance.

It would actually be done fairly quickly, since we already have MS45.0 and MS45.1 mapped out and tuned. Theoretically, we could just port the ZHP file for all 330s (both ZHP and non-ZHP), but we want to be thorough and have a specific tune for the non-ZHPs as well. It would take us probably 1-2 days to bang it out on the dyno, figure we'd need the car for about 1 week for install/tuning.

[2003330i]

<img src="http://www.technikpower.com/temp/technik_060129_14b.jpg">

For reference, here is a dyno of our 8psi kit for the 330 ZHP...

<img src="http://www.technikpower.com/temp/zhpdyno.gif">[/QUOTE]

is this with the tm12 or tm15?

[zolti@technik]

tm-12

[Joowick]

:drool:

why did I have to buy a crappy car with a sulev engine.. :banghead:

[E46 SC3]

This thread has been up for 1 week already, and nobody has jumped on this!

If I remember correctly ... I paid $5295.00 for my stage 1 (and that was on a group buy) plus $1000.00 for my install. That means doing this would save somebody $2300.00 ... what are you waiting for??

[russ330]

^I don't get it either. :dunno: Offer this kind of deal for a Stage II or III at the right time and I'd gladly drive 2000 miles for the deal.

[E46 SC3]

^I don't get it either. :dunno: Offer this kind of deal for a Stage II or III at the right time and I'd gladly drive 2000 miles for the deal.

Maybe you didn't catch it ... But the stage II is offered in this deal! $4495 with install :thumbsup:

or maybe, it's just not the right time for you :tsk:

[pimpn04coupe]

wow if my car wasnt focking auto i would be ALL OVER THIS.

[russ330]

Maybe you didn't catch it ... But the stage II is offered in this deal! $4495 with install :thumbsup:

or maybe, it's just not the right time for you :tsk:

Or maybe it's a Stage II from scratch, I already have a Stage I. They probably want to install and test all the components, not just the software.

Shake your head at that.:rolleyes: No need to act like a jerk.

[E46 SC3]

Or maybe it's a Stage II from scratch, I already have a Stage I. They probably want to install and test all the components, not just the software.

Shake your head at that.:rolleyes: No need to act like a jerk.

Sorry, I didn't realize you were already at Stage I.

As for the headshake ... wasn't trying to be as you put it "a jerk". I was just trying to say that you might be sad that the timing wasn't right, and I didn't what to use the crying face.

[russ330]

^Oh, gotcha, my mistake. There's been so much arguing on the forums lately that I'm almost looking for an argument even if there isn't one there. Once again, my apologies.

[E46 SC3]

^ No problem my friend. :thumbup: It's all good!

Back to topic ... Why hasn't anyone jumped at this incredible deal :wow:

[david05111]

OMG I want to do this!!! Does anyone know how much shipping costs would be to there? I'm in FLA...

[ksuen21]

Ugghhhhh, help out the 01' models....and come to the east coast:eeps:

[m330]

damn only if my car was a 03 and only if it was a manual :banghead:

technik wanna show the 02's some love :D

someone jump on this NOW!

[HighBoostin330]

Yea, someone jump on this so they can finish their CARB. Some of us want our CARB stickers. :P

[AutoTalent]

OMG, that kit is just pure sex....I WANT ONE!!!!!!!!!!!!!!!!! =(

Mine's an '03 by the way! HAHAHAHHAHA...

[330iCanada]

It would actually be done fairly quickly, since we already have MS45.0 and MS45.1 mapped out and tuned. Theoretically, we could just port the ZHP file for all 330s (both ZHP and non-ZHP), but we want to be thorough and have a specific tune for the non-ZHPs as well. It would take us probably 1-2 days to bang it out on the dyno, figure we'd need the car for about 1 week for install/tuning.


What is the status of the SC tunning for the MS45.1 (non-ZHP)?

[HighBoostin330]

What is the status of the SC tunning for the MS45.1 (non-ZHP)?

Want to ship your car there and take one for the team? :D

[david05111]

Want to ship your car there and take one for the team? :D

What does it cost to ship a car?

[2003330i]

What does it cost to ship a car?
i would say 1k.
https://www.dasautoshippers.com/Quote_Results.aspx

i was close. it came out to 1100

[david05111]

i would say 1k.
https://www.dasautoshippers.com/Quote_Results.aspx

i was close. it came out to 1100

HOLY FVCK!! I got a quote awhile back from the east coast to the UK and it was around 1500 one way. But that was across the ocean!!

[330iCanada]

HOLY FVCK!! I got a quote awhile back from the east coast to the UK and it was around 1500 one way. But that was across the ocean!!

Technic,

Where are we at with the MS45 SC software for non-ZHP?

[BADZ11]

Does anyone know if this kit is still available at this price, or if the company is still around?

[TeKNiC3]

Two year old thread....yes they're still around.

[beanfree]

Good luck getting in touch with them. I have been waiting for them to contact me for the last year to fix some issues.