Cooling Mist Water Alcohol Over Stock Blow-OUT!

[KO-JPK]

Due to this years previous drama with a former employee, KO has been sitting on 3 Cooling Mist 150 PSI Dual nozzle single stage kits that we purchased in early January.

We purchased these kits with the intent on using them in our Z3 project car supercharger kit, however... until we can afford to purchase a Z3 to finish the project, we have no need for them.

These 3 Cooling Mist kits are un-used, brand new, and need to GO!

The Cooling Mist part # was 275-350.

These kits include:
water pump
relay socket
relay
boost switch
15 feet hose
pump hose / barb to tank
primary wire
fuse / holder
connectors
injector nozzles
check valve and fittings
injector holder
pump barb high pressure side
brass water filter and hose connectors
Tank Taping Kit

I have 3 of these kits available and that's it.

They're going for $300.00 each + shipping.

You can adapt this kit to work with any application you chose. They are sold as is (brand new, never used), no returns, and include Cooling Mist wiring diagram and instructions.

Call or email to order.

[dreuter]

can you tell me what this kit does and what else you need. (S/C)? i searched it and it took me to a srt forum and didn't want to search any more.

[KO-JPK]

can you tell me what this kit does and what else you need. (S/C)? i searched it and it took me to a srt forum and didn't want to search any more.

This kit is the equivalent in function to the AA water alcohol injection tank / system which we also sell.

these are most often utilized with a supercharger system to cool the boosted air charge by evaporating water after the boost increases the PSI and heat of the air going to combustion.

I have 3 raw kits ready to ship out. We are not looking to make anything on these.