Dress Up Your Engine Compartment With A Rogue Engineering Oil Filter Lid

[Bob@BPS]

Rogue Engineering Oil Filter Lid...one of the few inexpensive ways to dress up your car!!

https://www.nexternal.com/bimmer/images/oil_lid_300.jpg
This fits the following vehicles
E30 318i
E32 735i
E34 525i, 535i
E36 318 (M42), M3, 325, M Roadster/Coupe
E46 M3

The Rogue Engineering CNC'd Oil Filter Lid was created to improve the looks of the engine compartment by replacing the cast factory part with machined version which dimensionally emulates the factory version. This cover replaces the factory cover P/N 11-42-1-711-075.

Made from 6061-T6 aluminum, this cover seals like factory and installs in minutes. Available in brushed aluminum or pewter anodized finish with Rogue Engineering logo.

You can find it on our site here (http://www.nexternal.com/bimmer/Product235).
https://www.nexternal.com/bimmer/images/oil_lid_installed_550.jpg

[Bob@BPS]

Hi guys,

This is a very easy DIY. Check out the before and after below. I think the lid dresses up my engine compartment a lot. We just received a shipment today and I put one on my own car. it took less than 5 minutes, using a 13mm socket and you re-use the rubber gasket from the OEM lid.
http://www.bimmerperformancestore.com/images/oilfilterlidani.gif

[ikeupinya]

How bout' E46 323, 325, 328 & 330's???

[Mikaly]

How bout' E46 323, 325, 328 & 330's???

Seriously. I would DEFINITELY get these if they made is for 323/325/328/330. :excited:

[Sshark]

same here for a 328

[bimmer07]

yea for 323 i'd get one

[BamBam26]

This sucks cause I just spent 60 dollars to replace the one on my car because it was cracked

[WhIte///D3MON]

any pics of the
Pewter Anodized Finish with RE Logo?

[Bob@BPS]

This sucks cause I just spent 60 dollars to replace the one on my car because it was cracked

I'm sorry you missed out.

Bob

[Bob@BPS]

any pics of the
Pewter Anodized Finish with RE Logo?

Sorry, we don't. I'll request a pic of that from Rogue.

Thanks for your interest.

Bob

[ikeupinya]

I'm sorry you missed out.

Bob

I'm missing out too because somebody don't want to answer my previous post!!!:tsk:

[Bob@BPS]

I'm missing out too because somebody don't want to answer my previous post!!!:tsk:

Sorry, we're much more active at the M3forum because there are a lot less posts about how some poor guy's girlfriend cheated on him with his ex-best friend. :rofl:

Please keep us in mind in the future and contact us directly if you want a quick response using the contact us form at the link below or just call us at 805.482.1234.

Bob

[Bob@BPS]

bump