*Euro-Spec Hamann Style Front and Rear Add-Ons and Skirts*

[Paul@Euro-Spec]

You wanted selection and now you have it.

Introducting Euro-Spec

Polyurethane Hamann Style Front Add-On for Sedan ($149 + $60 shipping)

Polyurethane Hamann Style Front Add-On for Coupe ($149 + $60 shipping)

Polyurethane Hamann Style Rear Add-On for Sedan ($149 + $60 shipping)

Polyurethane Competition Side Skirts for Sedan (249 + $60 shipping)

Duraflex Hamann Style Front Add-On for Sedan ($125 + $60)

Duraflex Hamann Style Front Add-on for Coupe ($125 +$60)

Duraflex Hamann Style Rear Add on for Sedan ($125 + $60)

Duraflex Sedan/Coupe (1 fitment for both) Competition sideskirts ($199 + $60)

Duraflex Hamann front add on for sedan

http://static.flickr.com/82/261949958_d7d99ef3a6.jpg?v=0

Polyurethane rear add on for sedan

http://static.flickr.com/81/261949961_73752d72f7.jpg?v=0

Polyurethane side skirts for sedan

http://static.flickr.com/84/261949963_fad282fec9.jpg?v=0

[E46NorCal]

Polyurethane Competition Side Skirts for Sedan (249 + $60 shipping)

no poly for coupe???

[Paul@Euro-Spec]

Polyurethane Competition Side Skirts for Sedan (249 + $60 shipping)

no poly for coupe???

no sorry about taht. i have a feelin a shop could make these fit on a coupe though. might be a tad long but with some adjusting and some enlarging of holes, should be nice.

[ziggyE46]

I have test fitted the polyeurethane sedan front lip and sides on my car last night.

Thoughts:

-Super high quality pieces, the real hamann pieces should have been made like these, Why buy an expensive hamann fiberglass piece when you can have these polyeurethane pieces that are tougher when it comes to scrapes and a third of the price. These parts feel like OEM poly pieces.

-Since the front lip is poly, a body shop can actually rivet them to a stock bumper and do away wit the double sided tape for toughness...Basically, if your body shop adds a flexible primer to the paint, you can scrape scrape all you want.

-The side skirts fit perfectly to the car and have very tight gaps, and the contour of the skirts themselves are indistinguishable from the real ones. And a big plus is that they have the groves built into the inside so that you can use the factory snap on clips that hold the stock sides to the car. The holes underneath that attach them to the underside of the car even line up perfectly, and again, you can use your stock clips!

Since i picked these up from Paul last night and got home when the sun was going down, i didnt get to take super detailed pics of them but the pictures that i will post later on today will be good enuff and will show the points that i am talking about. They are getting dropped off at my body shop tonite and should be done by next tuesday, i will take better pics of them as i install them on the Smurf. Pics should be coming today, since i had to borrow another camera since mine had issues. You guys cant go wrong with these parts!

STAY TUNED!

-Ray:mischief:


PS: about fitting these to a coupe, to be honest with you guys it shouldnt a problem, once adjusted properly to compensate for the slight difference in length from 2 and 4 dr, they will look fine.

[tdevil]

looks good!


*wants Hamann GTRs pieces!*

[NYSpeedRacer]

what the diff btw poly and duraflex? and any package discounts?

[ziggyE46]

what the diff btw poly and duraflex? and any package discounts?


big difference:

polyeurethane- same flexible plastic that your OEM bumpers are made of

duraflex- fiberglass with flexible dupont additive to make it tougher and more resilient than a normal fiberglass part.

discounts? - ask the man himself.;)

[Paul@Euro-Spec]

PM me on which parts you want and in what material for a package price :hi:

[DJ_Ado]

I have a 03' 325i sedan, is the rear hamann add on compatible with my rear bumper, its a non-mtech II bumper i have?

[ziggyE46]

I have a 03' 325i sedan, is the rear hamann add on compatible with my rear bumper, its a non-mtech II bumper i have?

the hamann front and rear addon's are for the pre facelift cars. to make this work on your 2003, you need to get a prefacelift bumper...My car is also a 2003 and i had the same dillemma as you, so i had to change to older style...But then again, u can find prefacelift bumpers around this site pretty cheap too.

[jeremysmith1967]

paul, did you ever test fit the acs rear add ons to see if they fit coupes?

[XoDuZz]

Damn those are some pretty good deals!

[Paul@Euro-Spec]

Any local COUPE owners to Los Angeles interested in test fitting the SEDAN acs rear add on to see fitment , please PM me for special deals. Need a prefacelift and facelift coupe please.

[Paul@Euro-Spec]

the hamann front and rear addon's are for the pre facelift cars. to make this work on your 2003, you need to get a prefacelift bumper...My car is also a 2003 and i had the same dillemma as you, so i had to change to older style...But then again, u can find prefacelift bumpers around this site pretty cheap too.

:thumbsup: :thumbsup: :thumbsup:

[ziggyE46]

Fellas, sorry i havent been able to post up pics. My camera had some issues and the camera i borrowed had issues too...I was able to salvage these too pics...I had them painted already and will be getting them back from the body shop on wednesday...I will start a new thread in the showroom section when i get them back. The lip will already be attached to the bumper but i will attach the sides myself.

-Ray

http://i20.photobucket.com/albums/b232/LSBE46/DSCN1599.jpg

http://i20.photobucket.com/albums/b232/LSBE46/DSCN1598.jpg

[Presns323i]

wow... i kind of want those sides....
but my car has too many miles now for new mods!

[ziggyE46]

wow... i kind of want those sides....
but my car has too many miles now for new mods!


dood, get em! who cares how many miles u have...at those prices euro-spec is slangin em for, u cant lose! wai till i get em back and see how much of a plug and play type deal these skirts are...=)

[Paul@Euro-Spec]

can't wait for pics Ray! :str8pimpi

[TSX euro-R]

Pics coming soon...

[Paul@Euro-Spec]

pics veeery soon from ziggy

[C Digital 323CI]

PM sent Paul for package deal!

[Paul@Euro-Spec]

PM sent Paul for package deal!

pm replied :thumbsup:

[My1stM3]

wait, so your telling me that the sides attach on both the bottom
( underside) and on the sides with the factoy clips?? Both locations? this is amazing, no replicas have done this yet

[Paul@Euro-Spec]

wait, so your telling me that the sides attach on both the bottom
( underside) and on the sides with the factoy clips?? Both locations? this is amazing, no replicas have done this yet

you got that right bro. only the polyurethane versions have the railing to clip into the stock clips. the duraflex version to not have the railing to an adhesive would need to be used for the duraflex versions. both versions have the oem design on the bottom so all you need to do is drill holes where indicated and use your stock clips on the bottom too.

[ziggyE46]

you got that right bro. only the polyurethane versions have the railing to clip into the stock clips. the duraflex version to not have the railing to an adhesive would need to be used for the duraflex versions. both versions have the oem design on the bottom so all you need to do is drill holes where indicated and use your stock clips on the bottom too.

its a total plug and play design...wait till i get mine back from the paint shop and i post the pics! hehehe:yikes:

[m330]

saw it today ray :eeps: :shhh:

[ziggyE46]

saw it today ray :eeps: :shhh:

wtf! man, didnt get the call from the painter...i guess it didnt get done...well he has 2 more days...it will 4 sure be done b4 the weekend:mischief:

[garen45]

PM sent Paul for package deal!

[tommiexboi]

you allow pick ups? im interested in the rear add-on pm me back

[Hey-G]

waiting on pics, I'm pretty interested. You ship to Canada?

[Paul@Euro-Spec]

waiting on pics, I'm pretty interested. You ship to Canada?

yes we do. we'll chat after fitment pics are in

[J4K2onE46]

^Paul, PM sent. :)

[Paul@Euro-Spec]

^Paul, PM sent. :)

pm replied

[J4K2onE46]

pm replied

Paul, I didn't get the PM? :dunno:

[gjeldubbimmer]

Howzit Paul,

Thanks for the quick ship!!! I recieved the rear add on today and I think the sides will come in tomorrow :excited:

This EUROSPEC product is MOST DEF TOP NOTCH BRAH!!!It flows well with my wifey's set up.

So far so good, unfortunately the DHL guy didnt really follow the FRAGILE sticker :rofl: since they threw it across my gate (which is about 6ft high hehe) Anyways, it looks good brah.

I will post pix once I get it painted and the cocofanatics crew install :)

NOTE: Sorry for the poor pix since its late

[ziggyE46]

Update:


my body man has finally finished the parts and i will be picking them up and installing them tonite...in addition to the hamann replica pieces, i also recived an ACS rear window spoiler along with an MVR replica rear wing....Pics are coming very soon, hopefully i finish this early enuff tonite to where there is still light.


-ray

[pnoyaballer]

euro-spec.net is the best!!

[Paul@Euro-Spec]

euro-spec.net is the best!!

:thumbsup: :thumbsup: thanks paul

[Paul@Euro-Spec]

here are pics of fitment of the polyurethane front add-on and sideskirts on ZiggyE46's sedan!! :thumbsup: :thumbsup:

http://static.flickr.com/74/273412545_bb3eaf0e72.jpg?v=0

http://static.flickr.com/106/273412539_2f307bbd93.jpg?v=0

http://static.flickr.com/89/273412543_fc87ff7730.jpg?v=0

[Sean D]

Paul,

Are there any plans to make any GTR style side skirts for the E46 M3 or Regular 3-series coupes in the near future? :hmm:

[Nuori]

That side skirt fitment looks superb!

[Paul@Euro-Spec]

Paul,

Are there any plans to make any GTR style side skirts for the E46 M3 or Regular 3-series coupes in the near future? :hmm:

there are plans to source some but still in the works. i don't want to give any tentative dates because it's hard to say.

[Sean D]

there are plans to source some but still in the works. i don't want to give any tentative dates because it's hard to say.

That sounds promising. :excited:

If you were to release these, would you insist on including the rail on the back that allows you to use your stock clips to attach to the car? :idea:

[Paul@Euro-Spec]

That sounds promising. :excited:

If you were to release these, would you insist on including the rail on the back that allows you to use your stock clips to attach to the car? :idea:

if they were plastic yes. if they were fiberglass would be kinda hard. we'll see what happens....now can we stay on topic of this thread which is HAMANN COMPETITION??!! :rofl:

[Sean D]

if they were plastic yes. if they were fiberglass would be kinda hard. we'll see what happens....now can we stay on topic of this thread which is HAMANN COMPETITION??!! :rofl:

Oops! Sorry Paul. :cry: :rofl:

[Paul@Euro-Spec]

That side skirt fitment looks superb!

agreed Brad! :thumbsup:

Oops! Sorry Paul. :cry: :rofl:

:rofl:

[Paul@Euro-Spec]

:thumbsup: here are pics of fitment of the polyurethane front add-on and sideskirts on ZiggyE46's sedan!! :thumbsup: :thumbsup:

http://static.flickr.com/74/273412545_bb3eaf0e72.jpg?v=0

http://static.flickr.com/106/273412539_2f307bbd93.jpg?v=0

http://static.flickr.com/89/273412543_fc87ff7730.jpg?v=0

[ziggyE46]

they fit great paul, as u can see.....thanks a bunch! we did a did a digital horizon shoot tonite...pics will be up soon!

[knuts]

so you have a hamman front lip addon to the origional coupe front bumper?

[garen45]

Hi Paul I have emailed you several times and pmed you but i havent gotten a reply. I am interested in the Hamann Competition side skirts and rear add on preferably Polyurethane if not ill settle for fiber glass on either or both. i am also local in la so i can pickup. please let me know. thank you, Garen

[ziggyE46]

so you have a hamman front lip addon to the original coupe front bumper?

no its a sedan prefacelift bumper on a facelift sedan. =)

[Presns323i]

u got new wheels agian ray?

[Paul@Euro-Spec]

so you have a hamman front lip addon to the origional coupe front bumper?

we do carry the coupe hamann front add-on if you're interested.

Hi Paul I have emailed you several times and pmed you but i havent gotten a reply. I am interested in the Hamann Competition side skirts and rear add on preferably Polyurethane if not ill settle for fiber glass on either or both. i am also local in la so i can pickup. please let me know. thank you, Garen

sorry about that Garen. let me shoot back a PM now.

[Hedges]

I am definitely interested, not too sure if i have the facelifted or prefacelifted! I got the 04 bmw 325I 4dr sedan with the two little holes for the fog holes!

[Paul@Euro-Spec]

I am definitely interested, not too sure if i have the facelifted or prefacelifted! I got the 04 bmw 325I 4dr sedan with the two little holes for the fog holes!

doh! you have facelifted bro. sorry about that. perhaps consider a new front end? m3 or csl? hehe

[E60 545i Sport]

hey paul, am i missing something or do you not have the rear add-on for coupes? if you do please pm me the price for rear add-on and sides. thanks

[LakeShow]

Here'a a couple of pics I took of Ziggy's car to show fitment, teaser pics actually. Paul's kits fits to a tee :thumbup: Hope you dont mind Ray LOL!

http://img83.imageshack.us/img83/4762/img0337bw9.jpg (http://imageshack.us)


http://img83.imageshack.us/img83/4149/img0340ud4.jpg (http://imageshack.us)

[2000_328CI]

now this is not meant to discredit euro spec as they deliver a great product and have been (seemingly.. i've never done business with them myself) a stand up vendor with a great product...... BUUUUUUT

while the fitment looks perfect, the skirts look wavy as all hell :confused:

i'm not 100% certain but it sure looks that way from the pics

[ziggyE46]

now this is not meant to discredit euro spec as they deliver a great product and have been (seemingly.. i've never done business with them myself) a stand up vendor with a great product...... BUUUUUUT

while the fitment looks perfect, the skirts look wavy as all hell :confused:

i'm not 100% certain but it sure looks that way from the pics



the skirts do have a bit of wavyness there but its because i had my painter throw a rocker panel flex additive into the paint to make it more resillient to rocks...this car is going to see some tracktime in december so i wanted to give the front lip and sides some protection against rocks. the additive is basically the same kinda stuff that makes lower rocker panels look "rough". certain manufacturers apply them to new cars. But of course they can be finished anyway u want . =)


damn mer, nice pics! so i guess my secrets is out wit the wheels.

[2000_328CI]

yeah... plus, the finish of the skirts (in terms of paint) is really up to the body shop.... all skirts will have imperfections and with replica skirts like these, the body shop will have to do a good bit of work to get them looking right.

As long as people know that going in, i say nothing but best of luck guys :thumbup:

[tblue3cibm]

Damn no coupe love with the rear and sides:cry:

[Paul@Euro-Spec]

hey paul, am i missing something or do you not have the rear add-on for coupes? if you do please pm me the price for rear add-on and sides. thanks

you are not mistaken. no rear for the coupe yet

Damn no coupe love with the rear and sides:cry:

the sides will fit coupe or sedan. for those wondering, stock coupe and sedan sideskirts both measure 78". these run a tad bit shorter, so with slight adjustment front or back you'll be sittin pretty with either a coupe or a sedan.

[Paul@Euro-Spec]

pics of hamann poly side skirts on my sedan

http://static.flickr.com/121/275677009_6e9b0af659.jpg?v=0

http://static.flickr.com/116/275677006_3358682608.jpg?v=0

[E60 545i Sport]

looks great Paul, do you have any full body shots of your car? thanks

[bimmer07]

do you have any of the hamman fronts for sedans left??

[Paul@Euro-Spec]

do you have any of the hamman fronts for sedans left??

yes we do :thumbup:

[garen45]

Hey paul can i get your paypal address, and your phone number so i can paypal you the money and call to schedule a pickup? I'm hoping you still have the polyurethane sideskirts available for a coupe.

Do you know when you will get the polyurethane rear add-on for the coupe also?

Thanks,
Garen

[Paul@Euro-Spec]

Hey paul can i get your paypal address, and your phone number so i can paypal you the money and call to schedule a pickup? I'm hoping you still have the polyurethane sideskirts available for a coupe.

Do you know when you will get the polyurethane rear add-on for the coupe also?

Thanks,
Garen

pm sent garen

[Paul@Euro-Spec]

PICS OF OUR DURAFLEX HAMANN SIDESKIRTS. I DIDN'T HAVE ANY DOUBLE SIDED TAPE THUS THE REAR STICKIN OUT SLIGHTLY. FITMENT IS VERY GOOD ON THESE THOUGH

http://static.flickr.com/96/278565691_289f048a5d.jpg?v=0

http://static.flickr.com/88/278565693_8ca0d3877c.jpg?v=0

[skiggity]

Here are pictures of mine. Hard to take a good straight on picture inside my thin, crap filled garage. I'll get better pictures soon. My job has me staying at work till the end of daylight, no chance to get pics till the weekend.

Also let me add yet another shout out to Paul for providing some of the greatest customer service i've ever experienced. He even called ME when I was having problems! Now when does a sponsor ever call you when YOU are having problems! Hahah! (I don't know if he'll do that for you, maybe i'm just special.

http://www.jonfong.com/bmw/skirts/1.jpg
http://www.jonfong.com/bmw/skirts/2.jpg
http://www.jonfong.com/bmw/skirts/3.jpg
http://www.jonfong.com/bmw/skirts/4.jpg

Fitment is perfect. Duraflex seems to be pretty durable given the fact that I already drove up a sharp curve'd driveway, scraped my right side to death, and they didn't crack... :banghead: They are scratched up pretty bad, but they stayed on and stayed in tact.

[ziggyE46]

very nice....what a way to test how that duraflex material works...LOL!

[Paul@Euro-Spec]

thanks for the pics jon they look great!

[Dr. Anthony]

Quick question guys.

I have a 2000 titanium silver 323ci.

I'm going to be purchasing an M3 style front bumper. it'll either have the AC Style Lip, or.. it wont :)

now my question to you guys is. Should I order these side skirts, and rear lip? What do you think would look best?

would it look good with the m3 front bumper, stock side skirts, and just buy the rear lip?

I need to start modding :excited:

[ziggyE46]

Quick question guys.

I have a 2000 titanium silver 323ci.

I'm going to be purchasing an M3 style front bumper. it'll either have the AC Style Lip, or.. it wont :)

now my question to you guys is. Should I order these side skirts, and rear lip? What do you think would look best?

would it look good with the m3 front bumper, stock side skirts, and just buy the rear lip?

I need to start modding :excited:

I would definately go with the hamann skirts, rear lip along with the M3 front bumper and acs lip....your stock sides wouldnt flow with just the M3 front/acs and the rear lip only.:)

[Dr. Anthony]

I would definately go with the hamann skirts, rear lip along with the M3 front bumper and acs lip....your stock sides wouldnt flow with just the M3 front/acs and the rear lip only.:)

thanks for the input. how do you think it would flow if i didnt have the ACS lip? but went with one of these lips for my rear bumper?

[Paul@Euro-Spec]

thanks for the input. how do you think it would flow if i didnt have the ACS lip? but went with one of these lips for my rear bumper?

actually the hamann rear lip we only have for the sedan and not the coupe. sorry. the skirts will fit a coupe however.

[Novare330]

still waiting on GTR replica side skirts and ACS rear add on for facelift coupes :excited: :excited: :excited:

[Hedges]

Any pics of the rear lip on the car?

[Asterisk*]

If only it was half a year ago... :rolleyes: :cry:

[Paul@Euro-Spec]

If only it was half a year ago... :rolleyes: :cry:

:bawling:

Any pics of the rear lip on the car?

yes tomorrow on my own ride. stay tuned

[kap09]

Paul, anyway you can do a package on the front/rear and a set of skirts?

Car is going in for paint in the near future :)

[Mart@Euro-Spec]

Paul, anyway you can do a package on the front/rear and a set of skirts?

Car is going in for paint in the near future :)


yeswe can offer a package deal. please clear your PM box and then send me a PM so i know you cleared it and we'll shoot over the discount

[wntrcoatblu240]

Pm sent.. please check.

[Paul@Euro-Spec]

[QUOTE=wntrcoatblu240;5084121]Pm sent.. please check.[/QUOT

gotcha

[kap09]

pm's are cleared :)

[Paul@Euro-Spec]

rear Hamann addon in polyurethane

http://i133.photobucket.com/albums/q43/eurospecbmw/1045-1.jpg

[wntrcoatblu240]

the rear looking good... i can't wait till i have money to get the poly sides..

[Paul@Euro-Spec]

get rid of that high A$$ prefacelift sedan owners! bring it down with the rear add on and compliment it with the front and sides. perfect combo :pimpin:

[Paul@Euro-Spec]

:hi:

[tblue3cibm]

still no coupe love? (sides and rear)

[zeshon]

I might be interested around Christmas in your upcoming GB on pre primed CSL V1s, and a set of these sides assuming they will fit on a coupe for sure. PM me with what kind of price I would be looking at.

[koven]

still no coupe love? (sides and rear)

:werd:

:cry:

[Paul@Euro-Spec]

:werd:

:cry:

partial coupe love. the sides will fit a coupe but not the rear

[Novare330]

GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR!

side skirts :) ...for coupe

[Paul@Euro-Spec]

lol..you were one GTR away from ruffling my feathers. they're coming. one version that fits both coupe and sedan, just like the originals. give it a few more weeks. def in time for christmas.

GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR! GTR!

side skirts :) ...for coupe

[Novare330]

lol..you were one GTR away from ruffling my feathers. they're coming. one version that fits both coupe and sedan, just like the originals. give it a few more weeks. def in time for christmas.

lol sweet, definately looking forward to it, any word on an ACS add on for facelift coupes as well? if they are comming out soon, im planning on pick up both at the same time, just so my car wont look awkward having one and not the other

[Paul@Euro-Spec]

lol sweet, definately looking forward to it, any word on an ACS add on for facelift coupes as well? if they are comming out soon, im planning on pick up both at the same time, just so my car wont look awkward having one and not the other

WE SOURCED ACS FRONT AND REAR ADD-ONS FOR FACELIFTED COUPES IN DURAFLEX. COMING BEFORE CHRISTMAS

[Novare330]

WE SOURCED ACS FRONT AND REAR ADD-ONS FOR FACELIFTED COUPES IN DURAFLEX. COMING BEFORE CHRISTMAS

:excited:

[Paul@Euro-Spec]

:str8pimpi

[Paul@Euro-Spec]

remember these are available in polyurethane or duraflex. Check your budget and jump on it!

[Paul@Euro-Spec]

Trying to source coupe rear hamann add ons as we speak.

[Paul@Euro-Spec]

:hi:

[koven]

Trying to source coupe rear hamann add ons as we speak.

:bow: :bow: any updates on mtech rears for coupe w/o PDC holes?

[anakbabe]

:hi:

do you guys carry any Hamann Lip for M-tech II?:hi:

[Paul@Euro-Spec]

:bow: :bow: any updates on mtech rears for coupe w/o PDC holes?

haven't found a rear bumper manufacturer we're happy with yet :bawling:

do you guys carry any Hamann Lip for M-tech II?:hi:

no sir we do not. we're on the lookout for it though

[Novare330]

:bump: i need that add on

[Mart@Euro-Spec]

:hi:

[deafboy]

any word on the front ACS front lip for stock non-M coupes?

[ziggyE46]

novare, nice sig foo!

[idoc330ci]

any word on the front ACS front lip for stock non-M coupes?

:werd: ....i want one for my prefacelift coupe PLEASEEE!! :excited:

How much do you think it would cost? What material will it be made of? tia.

[NO BAG BIMMER]

Trying to source coupe rear hamann add ons as we speak.

any luck yet ????

[Paul@Euro-Spec]

any luck yet ????

not yet on the couope hamann rear.

still have plenty of the front and rear add ons for SEDAN in duraflex or polyurethane AND

COUPE front add on in polyurethane or duraflex

[Paul@Euro-Spec]

bump

[nevin]

I didn't read the whole thread....Do you still have the hamann sides? What about hamann or ACS rear addons for an 03 325i? I need a rear BAAAAD!

[Paul@Euro-Spec]

:thumbup:

[wntrcoatblu240]

any words on the poly or duraflex rears for coupes? i'm itching to buy already.. lol...

[Paul@Euro-Spec]

any words on the poly or duraflex rears for coupes? i'm itching to buy already.. lol...

still lookin.....push comes to shove I might have a body shop guy see what it takes to fit the sedan one on a coupe and see if we can make a new mold.

[wntrcoatblu240]

still lookin.....push comes to shove I might have a body shop guy see what it takes to fit the sedan one on a coupe and see if we can make a new mold.

niiiice.. thank you for the update.. i'm sure theres a lot of people here just waiting for the rear... thanks again.

[EuroBmrDude]

That rear addon fits the 03 sedans right?

[Paul@Euro-Spec]

That rear addon fits the 03 sedans right?

sorry only fits prefacelift (99-01) sedan

[NO BAG BIMMER]

:bump:

[vision_promo]

I have a 99 328 sedan and am interested in the front lip and rear lip if they fit.

Let me know.......Thanx

[huzi7]

i have a 2001 non facelift sedan and i am after the front and rear add lips.

can you tell me what it would cost including shipping to the uk?

thanks

[Paul@Euro-Spec]

I have a 99 328 sedan and am interested in the front lip and rear lip if they fit.

Let me know.......Thanx

pm sent. fit like a glove on prefacelift sedans

i have a 2001 non facelift sedan and i am after the front and rear add lips.

can you tell me what it would cost including shipping to the uk?

thanks

uk shipping is steep bro. we will have to custom wrap and ship via usps which will cost $100 for front and same for rear add-ons. the front and rear will fit on your prefacelift sedan

[ShizerBaggins]

subscribing

[huzi7]

cheers for the reply mate

looks like it will work out very expensive with shipping to uk :cry:

[Mart@Euro-Spec]

cheers for the reply mate

looks like it will work out very expensive with shipping to uk :cry:

sorry man, wish you were down here in LA.

[wntrcoatblu240]

cheers for the reply mate

looks like it will work out very expensive with shipping to uk :cry:

hahah.. maybe time for a vacation?! :excited:

[Hedges]

Any of these made for a facelift? 04 325I sedan?

Thanks

Ben

[Paul@Euro-Spec]

Any of these made for a facelift? 04 325I sedan?

Thanks

Ben

sorry ben. only prefacelift