AA Gen 3 Level 2 kit? vs M6

[Amir PG]

would an 03 M3 with the AA kit Supersprint race front to back and BHS fan delete and some other mods could take the new BMW M6?? BTW SMG

[aggieE46]

Only one way to find out. Get to it.

[LagunaBlau///M3]

Dooooo EEETTTT

[kerisabe]

Amir! Go with the new HPF Turbo kit bro. Im pretty sure ull take the M6 by miles considering u have enuff rubber to grab onto the asphalt with that much power comin out of the turbo'd S54.

[rmatt8748]

git er done

only one way to find out

gotta run 335's on the back

fenders... just chop em off

[supersickbimmer]

I don't think that you could take the M6.

[Activ3]

You'd be putting out over 400rwhp, if you could put it to the ground, I think you could do it. M6's have ~510BHP, which is ~430rwhp or so, and they weigh a lot more.

[aggieE46]

Even though, I don't encourage Paper Racing...

Just going by internet figures.

Stock M3 has a power/weight ratio of: .0975
Stock M6 has a power/weight ratio of: .1279

If you were putting down 440 at the flywheel and shaved 100 lbs off your car, you'd bring that up to .13273, technically edging away. But, you never know until you try.

[Activ3]

Even though, I don't encourage Paper Racing...

Just going by internet figures.

Stock M3 has a power/weight ratio of: .0975
Stock M6 has a power/weight ratio of: .1279

If you were putting down 440 at the flywheel and shaved 100 lbs off your car, you'd bring that up to .13273, technically edging away. But, you never know until you try.

Level 2 would put him at ~440rwhp :)

[MarvelPhx]

I'd watch this race... M6 is a DAMN fast car.

[Amir PG]

im looking at a kit AA stage III 70m with 8 rib pulley 476rwhp. i think this is the way to go just to make sure you have enuff power to take the V10??? what do you guys think

[ZachB12]

buy an M6 and mod that

THEN ur looking at M POWER!!!!!!!!!

[GodSendsDeath]

buy an M6 and mod that

THEN ur looking at M POWER!!!!!!!!!

Why not buy a hartage 3er lol comes with the power plant from the m6.

[Amir PG]

come on guys i love my LSB.. just looking for some serious power.

[GodSendsDeath]

come on guys i love my LSB.. just looking for some serious power.

Keep your car and throw in the new M5 motor that will do the trick I think. If not than well you waisted 30 grand trying out a idea I though off in 7 seconds loll.

[silver///M3]

From my experience with an almost stock M6, btw I have stg1 80mm p full exhaust dynoed about 408whp. The M6 pulled ahead of me alot, but with the new stg 2 its worth a shot and it might be close if shifting and traction went smoothly.

[Mike Benvo]

M6 will win.

[Amir PG]

M6 will win.

even with the stage III??

[OCswedishM3]

even with the stage III??

stage 3 will take it. you need about 440whp with some lightweight mods. Once you get to 475whp..game over you pull ahead enough.

[TaZaM3]

stage 3 will take it. you need about 440whp with some lightweight mods. Once you get to 475whp..game over you pull ahead enough.

I think a healthy stage 2 will be close, but stg 3 should definitely win.

[MSpired]

Stage 3 should edge it out, but as teh speeds get higher, the harder it will become. I've been trying to get my buddy with an M6 to run me, i'll see if i can get that done tonight.

[Amir PG]

Stage 3 should edge it out, but as teh speeds get higher, the harder it will become. I've been trying to get my buddy with an M6 to run me, i'll see if i can get that done tonight.

oh please.:thumbsup:

[supersickbimmer]

On my A/A stage 2(440rwhp) Rost's M6 was still pulling slowly on a hwy run.130km+

[OCswedishM3]

On my A/A stage 2(440rwhp) Rost's M6 was still pulling slowly on a hwy run.130km+

What is your curb weight?

[aggieE46]

I think that big ol' engine just has a lot of umpf.

[supersickbimmer]

What is your curb weight?

I never weighed the car before, but the only weight I added to the car was the S/Cer and C/F diff, trunk and double sided hood.
OHH and the LM's. they're not that light.