Install Help?!!? Supercharger

[miller5223]

Hey guys i am installing my active c38 kit and i have a few final questions before it is complete...

This first picture i want to know where i should connect the line here were the directions..

Install grey valve with arrow towards the engine.
---This is installing the grey valve with line into what is called the purge valve line.(Ive connected it to the purge valve line and now it hangs loosley.

http://img262.imageshack.us/img262/3981/wherepurgevalvelineku6.jpg

The next one is a t valve has directions that say...
Attach the vacuum line that was previously installed at the back of the manifold to the blowoff valve,T the line from the fuel regulator(overflow line) into the blowoff valve vacuum line.

http://img486.imageshack.us/img486/4708/tlinerf4.jpg

where does number 3 go...it is real long and no clue what it should go to...


Im thinkin its just real late and iv been working a long time so let me know

[DinanBMW330]

try posting in FI, you might find more expert people there

[SinCityE46]

The new Purge oil valve line is hooked up to the super charger intake, while the old line is capped off.

Number 3 should go to a new bypass valve located on the supercharger intake.

[miller5223]

Could you please elaborate and maybe edit the pics and load them onto imageshack...thanks man i cant wait to get it all installed right

[SinCityE46]

most installs kits are like this.

someone correct me if I'm wrong.

http://forum.e46fanatics.com/attachment.php?attachmentid=223012&stc=1&d=1176622768

[miller5223]

thanks for the diagram...well sincity says the purge valve should go to the supercharger while the number 3 should be left to the blowoff valve...that may be so but that still leaves one more tube....im confrused....

[SinCityE46]

which tube?

[miller5223]

The t line already takes up those spots so the long number 3 is still left over.

[330i ZHP]

incredible diagram work there my man

[SinCityE46]

3 shouldn't be loose unless you accidentally pulled off another oem nub? It should be attached from the back of the manifold and followed through down to the throttle body.

Unless you have 2 by pass valve which I think I've seen on ASA kit.

[miller5223]

3 was a piece of the kit that came already together preasemballed in the T that you see in the picture...3 is jsut enormously long...

[zeshon]

Bringing this thread back to life. I'm still not super sure on how to connect these lines. Do I need to get rid of the old purge valve, then put the new bronze one in its place, or am I totally wrong right now. Some real pictures would be great.