PDA

View Full Version : Tech Gurus... Active Autowerke injector help

Low_bm
07-31-2007, 07:38 PM
i need help wiring the hfm calibrator, the active autowerke manual is not useful. all it gives is the diagram to were the wires connects to.. were are you supposed to get the wires from? on top of the fuel rail or the actual DME?
MarvelPhx
07-31-2007, 11:06 PM
It appears to me that they mean the wires to the HFM are spliced into the "calibrator". Correct me if I am wrong.
Low_bm
08-01-2007, 08:25 PM
It appears to me that they mean the wires to the HFM are spliced into the "calibrator". Correct me if I am wrong.

your right but im i supposed to get the wiring from the hfm connector? were im i supposed to get the wires from the dme? cause theres loads of wires
MarvelPhx
08-01-2007, 08:27 PM
I would think they mean to cut the wires near the HFM and splice the box between the ends. Have you called AA to ask?
Low_bm
08-01-2007, 08:33 PM
I would think they mean to cut the wires near the HFM and splice the box between the ends. Have you called AA to ask?

you mean like putting the hfm calibrator wiring in between the wire running to the hfm? so one lot of wires go towards the hfm and the others run back to the dme? bit like a resistor?:hmm: its confusing somtimes, lol
MarvelPhx
08-01-2007, 08:37 PM
That is exactly what I mean.
Jean@ActiveAutowerke
08-02-2007, 01:56 AM
i need help wiring the hfm calibrator, the active autowerke manual is not useful. all it gives is the diagram to were the wires connects to.. were are you supposed to get the wires from? on top of the fuel rail or the actual DME?

You get the wires that go into the HFM. You wire it in line with the HFM wires like in the diagram. If you have any questions feel free to give us a call. We can walk you through the process.

I would think they mean to cut the wires near the HFM and splice the box between the ends. Have you called AA to ask?

Exactly. Thanks :thumbsup: