Will an ASA 330 kit fit a 323?

[Lexie330ci]

Need to find out for a friend :)

[BimmerDude18]

Need to find out for a friend :)
....don't tell me its James?

And to support your question some.

The MAF is 3" instead of 3.5", the ECU is pretty different, the pulley will likely be sized wrong (less displacement so less airflow) - result is higher boost.

There are a few issues I could see arising, but I believe the hardware should be pretty doable.

[sheefo2k]

I thought the pulley was the same. the only difference is the maff tubbing and the throttle boddy tubbing. which is easly fixed at checkers or any auto store. just buy 3" hose like stated above

[BimmerDude18]

I thought the pulley was the same. the only difference is the maff tubbing and the throttle boddy tubbing. which is easly fixed at checkers or any auto store. just buy 3" hose like stated above

I'm not at all positive on that, just guessing that since the engine would move less air it would see higher boost to try to move the extra air.

IIRC his kit had a 6.5 psi pulley so it wouldn't be a big deal, just worth paying attention to when getting the ECU flashed.

[sheefo2k]

yea the ECU reflash is going to be intresting. They really dont need a reflash at 6.5 psi, he can just put on an ASAtronic