SC E46 m3 csl , need help for managment

[KRLOS]

we have a project and we need some help to realize it

the project

E46 m3 csl
gtr carbon , bonnet , front and rear bumper , and hatch
Moton suspension
m3 e36 engine w low comp full forged
asa 20 supercharger
AA intake manifold
blitz ssdd blow off

and we search the best engine controller or ignition \fuel controller for this setup

thanks a lot for your answers

and sorry for my bad english ....

[Penn]

Go with ESS kit. It has been tested and proven.

http://www.esstuning.com/default.asp?c=shop&cat=93&subcat=101&subcat2=142&id=

[KRLOS]

does he detailled the ecu ???

we have the asa kit on the car , we only need the management for the setup

thanks for all

[TxZHP04]

An e46 m3 CSL with an e36 M3 engine? Sounds like a rather strange project to me. Since you are working with an e36 motor, you will probably get better input from the guys in the FI forum over at bimmerforums.com. Lots of e36 expertise there, not so much here since we're an e46 forum.

[MachRc]

sounds like a crazy expesive racecar..


motec?
http://www.motec.com/

I know twin turbo'd Gallardo uses em..
FRANCE

Akira Technologies
Sylvain Loume
Z A St Frederic
Rue de la Galupe
64100 Bayonne
France
tel: +33 559 50 11 39
fax: +33 559 55 58 18
email: akira.technologies@wanadoo.fr

Louviers Auto Development
Christian Dieux
Route National 15
27400 Heudebouville
France
tel: +33 23240 4740
fax: +33 23225 2410
email: administration-lad@wanadoo.fr

Matec
Distributors for France
Pascal Panetier
13 Rue Du Clair Vivre
26100 Romans
France
tel: +33 475 700 023
fax: +33 475 705 908
email: info@matsub.com
web: www.matec-sport.com

MF Power Competition
Marc Fanciullo
Rue Jean de Guiramand
13858 Aix Les Milles Cedex 3
Provence
France
tel: +33 442 900 300
fax: +33 442 224 260
email: mfpowercompetition@libertysurf.fr
web: www.mfpowercompetition.com

PROMAP
Valéry LeCoeur
No 1, Chemin du lac
84600 Valreas
France
tel: +33 490 350 618
fax: +33 490 350 174
email: info@promap-europe.com
web: http://www.promap-europe.com

[KRLOS]

An e46 m3 CSL with an e36 M3 engine? Sounds like a rather strange project to me. Since you are working with an e36 motor, you will probably get better input from the guys in the FI forum over at bimmerforums.com. Lots of e36 expertise there, not so much here since we're an e46 forum.


rather strange project ?? why , the csl owner bought a e36 engine for his e46 because he found a full forged engine ( a aborted project , with the asa compressor etc ) for a really good price

[zeshon]

A full forged engine? Is that ful forged internals, or the block is forged, too?

[KRLOS]

full internals , sorry for the confussion ^^

[xoutlawheartx]

Engine blocks are cast, not forged.

[zeshon]

Engine blocks are cast, not forged.

I have cast a few blocks before, I'm studying automotive engineering. That's why I was confused.

The cost of making this E36 engine work seems like it isn't worth it compared to just building the M3 with new pistons and conrods.

[Intellect555]

Check out the haltech systems but it takes forever to tune the car. You have a dyno? Then it won't take as long. But otherwise one drives and one sits in the passenger seat and tunes the car using a laptop.

[KRLOS]

the engine have forged pistons and conrods ,

we have a dyno for our management

-for resume :
-APEXI safc neo
-Motec
-haltec
-ess ( if they have supercharged setup on their products)
-DATAFAST P8 ecu

any other ?

and for you what's the best money / capacities product for our setup

..... for an 15 psi max forced induction engine ^^

[xoutlawheartx]

AEM ems all the way.