PDA

View Full Version : AA C-30 Kit Install

jjw2331
04-22-2008, 02:43 AM
I need some help guys.

What is this tube used for?
http://i262.photobucket.com/albums/ii83/jjw2331/missingtubecircled.jpg


Where does this tube (zig zagged one) connect?
http://i262.photobucket.com/albums/ii83/jjw2331/Pipesmarked.jpg
Penn
04-22-2008, 04:47 AM
I wouldn't suggest to install it without installation manual. Contact AA if you don't have one.
ridin325
04-22-2008, 08:03 AM
That L connects to the (idle air) which is right next to the throttle body. The long hose connects from the supercharger elbow to the part that goes to the crank case, its located on top right near the vanos and the spark plugs. Give me a picture of the engine bay and I will show you where it goes.
jjw2331
04-22-2008, 04:56 PM
Hey ridin325,

Thanks to ///Rogu3, I now have a manual. It shows that the long breather hose connects to the valve cover. Did you install the HFM calibrator for your 325? Or is that just for 323's?
ridin325
04-22-2008, 08:59 PM
Yes I installed the hfm calibrator. Sorry about the manual by the way I couldn't find it, then again I dont know if I even had one. If you have any questions let me know and by chance do you know when you are supposed to start building boost. My car starts building between 4-4.5k, i think it should be building boost sooner than that.
jjw2331
04-22-2008, 10:53 PM
I have a feeling I might run into more installation questions.

I'll let you know once I get the kit installed and running. Still waiting for the software. Did you replace the bypass valve?
ridin325
04-23-2008, 07:57 AM
Yes I just did on tuesday, it sounds the exact same but I think it is holding the pressure better.
Active Autowerke II
04-24-2008, 06:24 PM
Yes I just did on tuesday, it sounds the exact same but I think it is holding the pressure better.

I'm confused as to why you do not have an instruction manual. Did you purchase the kit used?
ridin325
04-24-2008, 07:12 PM
Yes
Active Autowerke II
04-26-2008, 09:42 AM
Yes

Give me a call on Monday morning and I'll get a set of instructions out to you.
ridin325
04-26-2008, 10:38 AM
I already installed it I dont need instruction, thanks though.
sheefo2k
04-26-2008, 11:21 AM
Give me a call on Monday morning and I'll get a set of instructions out to you.
Wow, beautiful move seriously :bow:

great job AA for offering the instructions and back up and the support for customers who even bought the unit used (yet looks brand new in the pictures)
jjw2331
04-26-2008, 02:08 PM
Those pictures are from malakia12 when he got his kit and he decided to post the parts in this forum. So I guess you are right in that it looks new because they are pictures of a brand new kit. But those are not the pictures from my used kit or ridin325's kit. So AA is offering a help to someone who didn't get a kit directly from them which is pretty good service to me.:thumbsup: