HPF Turbo Pictures + Downpipe Pictures (BIG Pictures)

[HPF Chris]

Here are some pictures of the turbo and intake mocked up along with the downpipe. You will need to scroll left and right to see it all. Here you can see the Tial 44mm VBand wastegate, wastegate re-route back into the downpipe, flex sections, turbo manifold and turbo. The second picture shows our new intake coupler, intake (rapid prototype version), and new air filter.

Once we received the new intake pipe coupler, we verified the rapid prototype would fit on the coupler before we sent it off to be manufactured in carbon fiber.

Note: The turbo is sitting on a metal bracket that doesn't come with our kit.

Click HPF Turbo Large Version (without intake) (http://www.horsepowerfreaks.com/miscellaneous/m3turbokit/turbomanifold/wointake.jpg)

http://www.horsepowerfreaks.com/miscellaneous/m3turbokit/turbomanifold/wointake_small.jpg

Click HPF Turbo Large Version (with intake) (http://www.horsepowerfreaks.com/miscellaneous/m3turbokit/turbomanifold/wintake.jpg)

http://www.horsepowerfreaks.com/miscellaneous/m3turbokit/turbomanifold/wintake_small.jpg

[remshot11]

i will take one for my non existing M. Nice stuff

[MachRc]

damn



http://www.horsepowerfreaks.com/miscellaneous/m3turbokit/turbomanifold/wointake_small.jpg
Its the star trek U.S.S. Enterhorsepowerfreaks

[A55A55IN]

damn

its the star trek U.S.S. Enterhorsepowerfreaks

lmao!

[MachRc]

"where no m3 has gone before......



dahhh tah tah tahhh....dahhhhht dahhhhhhh..dat dat dat dahhh dat dat datttata dat dat!!!!"

[SexyDev]

Chris is that yur car in the sig?

[MSpired]

Very sick pics!

[E36-Poser]

Dope. :bow:

Why doesnt anyone do this for the E36.....:cry:

[S54PWR]

Very nice mockups! :) IIRC, the downpipe can only be connected to a 2 pipe section 2 such as the OEM one. Too many aftermarket section 2s run one single pipe that enters and ends with the 2 flanges thus restricting flow. HPF wants Oem section as I recalled. Just incase those ask about the downpipe. ;) Will the new intake make a difference power wise vs. the old intake setup or is it strictly for cosmetic/visual purposes Chris?

[ispeedm3]

very nice mockups! :) iirc, the downpipe can only be connected to a 2 pipe section 2 such as the oem one. Too many aftermarket section 2s run one single pipe that enters and ends with the 2 flanges thus restricting flow. Hpf wants oem section as i recalled. Just incase those ask about the downpipe. ;) will the new intake make a difference power wise vs. The old intake setup or is it strictly for cosmetic/visual purposes chris?


+1

[LABMW13]

:drool: Beautiful

[///Mbimmer]

:drool: i want

[johnjohnsonS54]

mmmmmmmmm, that's some good turbo-nography