PDA

View Full Version : ESS 325/330 TS1/TS2 price reduction!

Asbjorn@ESS
07-06-2009, 12:40 PM
To keep up with the market and to reflect mass production savings on these kits we have changed retail pricing as of 7/6-2009.

The new prices are as follows :

TS1 325/330/330ZHP : USD5350
TS2 325/330/330ZHP : USD6850

Full details can be found on www.esstuning.com
lkstaack
07-06-2009, 03:37 PM
Asbjorn

Is this a temporary mark down?
Asbjorn@ESS
07-06-2009, 06:30 PM
It will stay this way until 12/31/09
juslookin
07-06-2009, 06:32 PM
It will stay this way until 12/31/09:(
bigabe
07-06-2009, 07:12 PM
Hmmm... just when I think I'm set on an AA kit....

So TS2+, ESS blower cams, AA headers, borla exhaust... I wonder what kind of rwhp numbers that will give me....

If it's around the 360-380rwhp numbers that I'm told I could hit with the C38/cams/headers/exhaust but with more low end grunt... this may be the new way to go!
Asbjorn@ESS
07-06-2009, 07:20 PM
The ESS TS is capable of 410+WHP, but we do not recommend running more than 8.5PSI and 330-340whp on a stock M54B30 on pump fuel. If you aim higher it is a must in our opinion to reduce compression ratio using our forged TS3 pistons or similar.
bigabe
07-06-2009, 07:25 PM
I wouldn't be running more than 8.5psi of boost...

I'm just curious as to what kind of power I could make with that level of boost.
Asbjorn@ESS
07-06-2009, 07:45 PM
I wouldn't be running more than 8.5psi of boost...

I'm just curious as to what kind of power I could make with that level of boost.

with 8.5PSI and cams/headers you are looking at ~330whp on pump 93.
BMW_E46er
07-06-2009, 11:26 PM
What kind of numbers will the TS2 make on a 2.5?
phrozen06
07-06-2009, 11:28 PM
What kind of numbers will the TS2 make on a 2.5?

goto ess's website.
pei330ci
07-07-2009, 12:40 AM
The ESS TS is capable of 410+WHP, but we do not recommend running more than 8.5PSI and 330-340whp on a stock M54B30 on pump fuel. If you aim higher it is a must in our opinion to reduce compression ratio using our forged TS3 pistons or similar.

Or run C16 all the time. :str8pimpi
BMW_E46er
07-07-2009, 04:35 AM
goto ess's website.

I was asking if they did dyno any 325's with TS2 and if yes, how much whp did they put down.
Safar
07-07-2009, 05:42 AM
So when you say this is specifically for the 325/330/ZHP, does that imply the TS kit is significantly different from the M54 to the M52TU? What differences are there besides the software?
Asbjorn@ESS
07-07-2009, 07:59 AM
M52TU kits differ a bit in the hardware. It uses a different SC intake elbow with cable holder for the throttle + different pulley setup and software.
///Flash
07-08-2009, 09:34 AM
what is the price for the M52TU?
Asbjorn@ESS
07-08-2009, 11:17 AM
Same pricing.
330i ZHP
07-11-2009, 12:13 AM
i can attest to the quality of the TS2+ and the TS3 kits - I love them both
BMW_Matt
07-11-2009, 12:37 AM
:drool: Now where can I find the lowest APR for a loan :rofl:
Lexie330ci
07-11-2009, 01:37 AM
website isnt working
Safar
07-11-2009, 04:11 AM
i can attest to the quality of the TS2+ and the TS3 kits - I love them both

And myself, being limited by cast M52TU pistons, can attest to the quality of the TS2 :)
///Flash
07-11-2009, 10:32 AM
Asborn

you have PM
KOTHB
07-13-2009, 10:00 PM
Hey Asbjorn! It's been awhile since I've checked in here.

Say, can I have some sort of rebate on my TS2? After all, it's only been in my car for about 50,000 miles!

:)

kidding. you guys rock.
TrippinBimmer
07-13-2009, 10:30 PM
ONE DAY ONE DAY! I WILL OWN ONE!.....hehe IDK which tho....
PHX325
07-14-2009, 08:17 AM
I'm new to this. I recently sold my M3 and am now using my 2003 325i as a daily driver. The HP sucks and was thinking of doing something to increase the HP. I looked at the site but as I'm new to this, coould someone point me to where to find the dyno on a 03 325i (auto) ? Thanks in advance.