E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Forced Induction Forum Sponsored by Active Autowerke (http://forum.e46fanatics.com/forumdisplay.php?f=41)
-   -   AA SC E46 M3 + 5.5psi =............................ (http://forum.e46fanatics.com/showthread.php?t=138388)

BWMguy206 01-26-2004 06:34 PM

AA SC E46 M3 + 5.5psi =............................
 
Repost from Bimmerforums..


Here are the dyno charts (mustang) for the E46 M3 with the Rotrex blower. The car is running 5.5psi with STOCK INTERNALS (compression has not been touched http://www.bimmerforums.com/forum/im...es/alright.gif ). The car has over 100+ dyno runs and we even took it up to Sebring this weekend for Winterfest. For those that don't know Florida, that is about 180 miles from AA. We went with about 12 BMWs and I don't mean easy driving. Highway 27 was OWNED by AA this Saturday.


THESE ARE PRELIMINARY DYNO RUNS, FINAL TUNING IS NOT DONE YET!


Note: the RPM signal was a bit off on both vehicles.

BWMguy206 01-26-2004 06:35 PM

more information can be found on this thread
http://www.bimmerforums.com/forum/sh...hreadid=171177

russ330 01-27-2004 05:46 PM

Wow. I'm not that familiar with M3 Dyno numbers, but I would think that they'd lay down a bit more power stock? :dunno:

BWMguy206 01-27-2004 06:13 PM

The dyno that AA Tuning used is a Mustang loaded dyno so numbers are a bit slower than what one might get using a dynojet.

AA is using the 1.25 correction factor.

russ330 01-27-2004 07:32 PM

Ah, okay, thanks. :)


All times are GMT -5. The time now is 05:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use