E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Exterior (http://forum.e46fanatics.com/forumdisplay.php?f=31)
-   -   |>>FS<<| Carbon Black M3 front bumper OEM (Off an '02) - [no fogs or grill] (http://forum.e46fanatics.com/showthread.php?t=199654)

spunshi 10-01-2004 07:21 PM

|>>FS<<| Carbon Black M3 front bumper OEM (Off an '02) - [no fogs or grill]
 
Up for sale is an M3 bumper off of a Carbon Black '02. No fog lights and no grill. There's reflection of leaves on the bumper so please don't think that they are scrapes or that's there's something on the bumper. The condition is really good except for some scrapes on the bottomside. No pictures of it since no one ever sees the bottom anyways. Either way, it's not bad at all underneath. And if you're going to repaint it, it's a moot issue. I have no idea about fitment to other 3 series, but found info on here that said TO PUT IT ON YOUR NON M3 YOU HAVE TO CUT THE ALUMINUM BUMPER FRAME INSIDE THE BUMPER :dunno: . Not sure so please find out yourself before contacting me. I prefer local pick up since it's a pain to ship it in a big box, which I have to find. Buyer pays actual shipping to their location. Price is $220 for pick up and $250 shipped. Here are the pics:

Straight on shot
http://home.comcast.net/~spunshi/Bumper_1.jpg
Angled straight shot
http://home.comcast.net/~spunshi/Bumper_2.jpg
Angled side shot
http://home.comcast.net/~spunshi/Bumper_3.jpg
Backside driver side
http://home.comcast.net/~spunshi/Bumper_4.jpg
Backside passenger side
http://home.comcast.net/~spunshi/Bumper_5.jpg
Backside center
http://home.comcast.net/~spunshi/Bumper_6.jpg
Front plate holder
http://home.comcast.net/~spunshi/Bumper_7.jpg
Close up of screw w/o cover
http://home.comcast.net/~spunshi/Bumper_8.jpg

The front plate holders on the front are also black colored so they don't stand out. It's a plastic piece that covers the screw underneath that fastens the plate to the bumper. Plastic piece is circled in red. There's also a clear plastic piece underneath the cover so the screw doesn't come directly into contact with the bumper's paint (red arrow pointing to it w/o cover over it). If you're going to paint the bumper and don't want that plate fastener, it's just a matter of filing the hole and sanding it down. The fasteners are very small so it doesn't stand out. Thanks! :thumbup:

spunshi 10-04-2004 12:46 PM

Still for sale. :thumbup:

spunshi 10-06-2004 01:53 PM

Priced now at $200 for pick up. Thanks! :)

spunshi 10-08-2004 07:43 PM

Still available. Thanks :) .

spunshi 10-09-2004 09:19 PM

SOLD :woot: !! Thanks guys! Enjoy :)


All times are GMT -5. The time now is 06:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use