E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   DIY: Do It Yourself (http://forum.e46fanatics.com/forumdisplay.php?f=27)
-   -   330ci without door moldings (http://forum.e46fanatics.com/showthread.php?t=304543)

vitaut 10-24-2005 11:48 AM

330ci without door moldings
 
My car was crashed in area of door moldings. I'd like to remove moldings from my car. Does somebody have fotos of e46 without them?

hummer 10-24-2005 12:07 PM

The molding is held on with plastic clips that will pop out. However, you will then see the holes where the clips were.

vitaut 10-26-2005 08:06 AM

Quote:

Originally Posted by hummer
The molding is held on with plastic clips that will pop out. However, you will then see the holes where the clips were.

I'd like to remove moldings and make doors like on this e36.

http://volin.at.tut.by/bmw1.jpg

tim330i 10-26-2005 11:08 AM

There is adjustment holes for the window behind the molding so if your remove the strips (have the holes filled) you wouldn't have anyway to adjust the windows. Not sure if that matters just something that might interest you.

Tim

vitaut 10-26-2005 11:35 AM

you didn't understand me. I'd like to remove moldings from DOOR, not chrom moldings under window.

Ausfahrt 10-26-2005 12:17 PM

1 Attachment(s)
Quote:

Originally Posted by vitaut
you didn't understand me. I'd like to remove moldings from DOOR, not chrom moldings under window.


He understood you. If you take out your moldings and fill it in your door your going to have problems. There is an adjustment hole to adjust your window right underneath the plastic moldings on each side of your door. He's not talking about the chrome trim. Look at the picture you can see the bigger holes.

vitaut 10-26-2005 04:52 PM

Quote:

Originally Posted by Ausfahrt
He understood you. If you take out your moldings and fill it in your door your going to have problems. There is an adjustment hole to adjust your window right underneath the plastic moldings on each side of your door. He's not talking about the chrome trim. Look at the picture you can see the bigger holes.

Problem like this was on e36, but it has been solved :smokin: .

Did anybody see e46 without moldings?

ABBOUSHI 10-26-2005 05:23 PM

there was a member on here that had shaved everything with m3 front conversion but he sold his car.


All times are GMT -5. The time now is 07:31 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use