E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   General E46 Forum (http://forum.e46fanatics.com/forumdisplay.php?f=4)
-   -   Help with Schnitzer type pedals (http://forum.e46fanatics.com/showthread.php?t=339174)

Phat46 02-19-2006 09:09 AM

Help with Schnitzer type pedals
 
I've lost the bolt and screw kit for my aluminum pedals. I can't find the correct replacement bolts. The correct bolts are M4 x 15 Torx bolts. Most hardware stores carry M4 x 16, but the head (flat, pan, etc) are too large. M3 heads usally fit, but the bolt diameter is way too small. Can anyone help?

If I go through AC Schnitzer, they are going to be pricey!

M3LTDOWN 02-19-2006 01:17 PM

Quote:

Originally Posted by Phat46
I've lost the bolt and screw kit for my aluminum pedals. I can't find the correct replacement bolts. The correct bolts are M4 x 15 Torx bolts. Most hardware stores carry M4 x 16, but the head (flat, pan, etc) are too large. M3 heads usally fit, but the bolt diameter is way too small. Can anyone help?

If I go through AC Schnitzer, they are going to be pricey!

Go on ebay and email a seller of the replica pedals. Ask how much they would charge just for the nuts and bolts. Shoulent be too much.

Good luck.

Phat46 02-20-2006 10:08 PM

The seller sent some shitty M3 x 16's. I can go to any hardware store and get those. I'll wait and see what AC is going to hang me.


All times are GMT -5. The time now is 10:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use