E46Fanatics (http://forum.e46fanatics.com/index.php)
-   BAVSOUND Mobile Electronics Forum (http://forum.e46fanatics.com/forumdisplay.php?f=22)
-   -   Stock HK wiring questions (http://forum.e46fanatics.com/showthread.php?t=37380)

TranceLvr 10-23-2002 02:22 PM

Stock HK wiring questions
Last weekend I installed an Xtant 121M sub amp and a 12" Boston Acoustics sub. I tapped into the stock HK sub wiring harness and used the green and blue/green wires for the sub input. The thing I noticed is that the voltage of these wires is VERY low. I had to set the amp to the 100mv - 300mv input voltage setting and even then the gain must be all the way up. I am not very happy with this arrangement since I know this gives me more distortion. Anyways, my questions is if I tap into the main amps wiring harness would I find that the voltage is higher in the leads for that amp?

Also in the sub wiring harness, what does the thin black/green wire do?

All times are GMT -5. The time now is 01:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - VerticalScope Inc. All rights reserved.