E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Forced Induction Forum Sponsored by Active Autowerke (http://forum.e46fanatics.com/forumdisplay.php?f=41)
-   -   Planning to go the FI way... (http://forum.e46fanatics.com/showthread.php?t=402633)

Evil330 09-16-2006 07:01 AM

Planning to go the FI way...
 
so I might buy a used ASA SC kit for my step 2003 330i with 60k on the clock. My baby is my only car, so is the SC ok for a daily driver? What psi should I run it on to be safe? Will my tranny hold all the power from the SC?

Thanks.

zulu4 09-16-2006 08:22 AM

why don't you buy the level ten upgraded tranny from Kashif as well?

bimmerboy36 09-16-2006 12:26 PM

level 10 is crap... don't waste your money

clean-m-tech330 09-16-2006 01:47 PM

Quote:

Originally Posted by Evil330 (Post 4878710)
so I might buy a used ASA SC kit for my step 2003 330i with 60k on the clock. My baby is my only car, so is the SC ok for a daily driver? What psi should I run it on to be safe? Will my tranny hold all the power from the SC?

Thanks.

Typically a auto tranny kit runs 6.5 psi, however the tranny could probably hold a lb or so more. An s/c car is just fine for a daily driver, i daily drive a stage 3 technik kit, everyday feels great, i love the kit- if you're looking for a kit email samir and let him know chris sent you and he'll answer any questions you may have, good luck-

Evil330 09-16-2006 02:04 PM

so at 6.5psi my tranny should be safe?

LakeShow 09-16-2006 09:59 PM

Quote:

Originally Posted by Evil330 (Post 4879571)
so at 6.5psi my tranny should be safe?

Definately :thumbsup:


All times are GMT -5. The time now is 12:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use