E46Fanatics (http://forum.e46fanatics.com/index.php)
-   General E46 Forum (http://forum.e46fanatics.com/forumdisplay.php?f=4)
-   -   How does the UUC cf handbrake stay in place? (http://forum.e46fanatics.com/showthread.php?t=4176)

David328Ci 05-04-2002 02:28 PM

How does the UUC cf handbrake stay in place?
I posted a about this a while back. Someone said there is a screw on it that can be tightened to hold it in place. I looked more closely at mine today and the screw is nowhere to be found. So how exactly does this thing tightened?

traumamc 05-04-2002 03:24 PM

There should be a screw on the underside of the ebrake handle. If you just see a hole, the screw must have fallen out. Call UUC, I am sure they can tell you exactly what kind of screw it is.

David328Ci 05-04-2002 04:16 PM

There is no screw and no hole.

traumamc 05-04-2002 08:24 PM

The best thing to do is call UUC on Monday. They have great customer service, I am sure that they will get you all fixed up :thumbup:

sgv321 05-04-2002 08:24 PM

maybe its a defect? Call UUC

vinnymac 05-05-2002 10:22 PM

There should not be a hole or screw for the UUC CF e-brake...
the ebrake handle should slide right on the ebrake shaft and attache to the leather boot with a plastic zip-tie. I put some cloth tape around the ebrake shaft so my CF handle would stay on a little snugger.

All times are GMT -5. The time now is 10:13 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - VerticalScope Inc. All rights reserved.