E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Sponsor Press Releases & New Product Announcements (http://forum.e46fanatics.com/forumdisplay.php?f=92)
-   -   Ksport Procomp Big Brake Kit (http://forum.e46fanatics.com/showthread.php?t=459526)

crosse46 04-03-2007 12:44 PM

Ksport Procomp Big Brake Kit
 
3 Attachment(s)
Ksport Procomp Big Brake Kit
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).

The Ksport big brake kit includes:

8-Piston Aluminum calipers
High quality brake pads
D.O.T. Compliant Stainless steel brake lines
Machined aluminum hats
Carbon steel brackets
330mm (13") large ventilated discs (17" wheels required)
Ksport SC5 street brake pads (RC1 race pads available for additional cost)
Extreme Lightweight Caliper:

Our extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless steel brake pad wear plates are also standard on each caliper design. The opposed piston caliper design greatly improves pad wear and caliper rigidity over the OEM design. The stainless steel brake lines stop expansion under pressure.

High Performance Rotor:

Most applications utilize the 2-piece floating disc assembly which reduces weight both rotating and unsprung. The floating disc also stops thermal stresses of extreme heat from warping the disc or cupping the braking surface. The unique slot design on the rotor greatly reduces braking noise and expels gas and pad debris faster than conventional slot designs. Every rotor is always heat treated and balanced before shipment for the best possible performance.

Ksport SC5 Street Pads:

These NAOC ceramic pads are designed to give you the optimal braking performance under street and occasional track conditions. Optimal operating temperatures are between 194F - 1022F for fast warm up under normal driving conditions. These pads reduce the amount of brake dust by 50% or more when compared to our race pads. The SC5 pads also greatly reduce the amount of noise and wear on the rotor over the race pads. The average coefficient of friction on this pad is between .46 and .53.

Ksport RC1 Race Pads:

These carbon metallic race pads are designed to give you the best stopping power possible under extreme track conditions. Optimal operation temperatures are between 480F - 1472F so it is not recommended for street use due to high temperature needed for optimal performance. Designed for the racer in mind to reduce brake fade under extreme conditions. The average coefficient on this pad is .5.


PLEASE PM US FOR PRICE, TOO LOW TO LIST

crosse46 04-05-2007 02:33 AM

all pm's replied offering super low prices for some test and review cars.

BruceWonder 04-05-2007 08:34 PM

quote for both front on 03' z4

BentleyJava 04-06-2007 10:45 AM

PM me price for e46 m3 fit, fronts.

crosse46 04-06-2007 12:42 PM

All pm's replied looking for a few track guys , please pm me is you track your vehicle.

whodo 04-06-2007 04:22 PM

You didn't get my pm yesterday?

crosse46 04-06-2007 10:30 PM

Quote:

Originally Posted by whodo (Post 5809801)
You didn't get my pm yesterday?

No , sorry i did not receive one.

Sammy

FLPSIDE 04-07-2007 01:46 PM

i PMed u again! i gotta bump this cuz the quote that i got was shocking! talking about LOW!!! wow....

crosse46 04-07-2007 07:52 PM

Quote:

Originally Posted by FLPSIDE (Post 5814187)
i PMed u again! i gotta bump this cuz the quote that i got was shocking! talking about LOW!!! wow....


Hey.....lol, this is a promotional offer for our new lines, however do not be concerned low prices here will not equate to bad service.

Jeuprx-8 04-07-2007 07:56 PM

pm'd you

Moltenburn 04-07-2007 08:13 PM

PMed hit me up

crosse46 04-08-2007 04:43 PM

All pm's replied and we thank you for your intrest and kind comments.

Sammy

hockeyguy 04-08-2007 08:31 PM

pm'd

crosse46 04-08-2007 09:21 PM

all pm's replied.......

My1stM3 04-08-2007 11:36 PM

please pm me a price for ///m3 fronts. Thanks

AssassinGT 04-09-2007 11:51 PM

Price Quote for 323Ci and E92 335i

crosse46 04-10-2007 02:02 PM

all pm's replied.

DJ BeBe 04-10-2007 11:29 PM

can i please get a quote for a 2000 e46 328i ?

BreakMyWallet 04-10-2007 11:32 PM

quote for a 323ci pleaaase :D

Geeza 04-17-2007 03:26 PM

Left a message this morning, quote for Front and Rear, thanks


All times are GMT -5. The time now is 10:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use