E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Parting Out (http://forum.e46fanatics.com/forumdisplay.php?f=76)
-   -   2002 BMW 330Ci original used Hamann parts (http://forum.e46fanatics.com/showthread.php?t=570048)

Kuk 04-29-2008 10:04 AM

2002 BMW 330Ci original used Hamann parts
 
3 Attachment(s)
this ad is for western Chicago suburbs (local pickup)

- original Hamann GTR front bumper, had damage on the bottom & was
fixed with epoxy, has minor cracks, will need a little bit more labor
with autobody filler compound, will need re-paint. $350
(was purchased brand new for $1600)
- original Hamann side skirts, good condition, will need to be
re-painted; currently black saphire metallic. $300 (were purchased
brand new for $800) - SOLD
- stock side skirts. Black saphire metallic, do not have to be painted $200
- stock rear bumper with ACS Shnitzer replica lip molded to it (impossible
to separate). Will need a little bit of body labor, will require re-paint. $250

cash and local pickup in western Chicago suburbs (Naperville).
For those who will be interested stop by and check out in person.

gazfatha323i 04-29-2008 02:59 PM

Are you selling your wheels? Are they m3 fitments? 9.5 rears?

Kuk 04-29-2008 05:51 PM

Quote:

Originally Posted by gazfatha323i (Post 7824241)
Are you selling your wheels? Are they m3 fitments? 9.5 rears?

no, wheels stay

jerrys330i 04-29-2008 05:54 PM

do you have any pics of the rear bumper?

Kuk 04-29-2008 10:52 PM

Quote:

Originally Posted by jerrys330i (Post 7825598)
do you have any pics of the rear bumper?

I will take pictures tomorrow (Wednesday) after work, post them and let you know ASAP

freshprince2421 04-30-2008 12:11 AM

how do you mount the front bumper to the reinforcement bar?

Kuk 04-30-2008 12:26 PM

Quote:

Originally Posted by freshprince2421 (Post 7828083)
how do you mount the front bumper to the reinforcement bar?

The shop did it for me :) But if you look at the picture, there is a bracket on each inner side of the bumper close to the top, and two holes on the bumper edges up top. You should be able to slide those brackets on the reinforsement bars and secure with two bolts through those holes :rolleyes:

Kuk 04-30-2008 05:34 PM

2 Attachment(s)
Quote:

Originally Posted by jerrys330i (Post 7825598)
do you have any pics of the rear bumper?

there you go

Kuk 05-06-2008 05:06 PM

ACS replica lip molded to a stock bumper
 
2 Attachment(s)
.


All times are GMT -5. The time now is 11:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use