E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Parting Out (http://forum.e46fanatics.com/forumdisplay.php?f=76)
-   -   FS: S54 Engine Parts (http://forum.e46fanatics.com/showthread.php?t=623080)

Lag 11-08-2008 10:43 AM

FS: S54 Engine Parts
 
Hi I have the following items for sale they are off of an 05 M3 Manual with 60k miles. Everything was working fine, I am parting this stuff out as I am using this motor in a different car and this stuff is no longer needed.

- DWB/EDR Throttle actuator $75
- Fan clutch, clutch works fine but a couple of fan blades are cracked. They are still attached but look like they have stress cracks. SOLD
- A/C compressor with engine bracket, all the lines, and belt tensioner.$200
- Clutch/Flywheel complete no slippage would be a good replacement clutch.$200
- Factory intake manifold with hoses, there are no cracks or anything in awesome shape.$125
- Both bank one and bank two headers with cats. Both cats are good, no CEL or anything.$175
- EGR Valve off of the head and the evap piece that bolts to the block. Not sure exactly what it is but it is not the pump. $50
- Full VANOS system with sprockets, pump lines etc. All working perfect, I went to a VABOS delete system $600
- Shifter assembly everything all the way to the shift knob. The boot is not intact though. $50
- Fuel rail with inhectors, and evap hoses? I think thats what they are, but the are attached to the rail. $200 for all 6 injectors and $150 for the fuel rail
- Oil pan/Pump with all the pick ups/dip stick tube and sensor at the bottom of the pan $500

These prices do not include shipping but are OBO please let me know if you need any of this, feel free to PM me or email me at atpd_20v@yahoo.com . I do have pictures of all this if you need them please email me or PM me with your email address, thank you for looking!

Lag 11-09-2008 07:26 AM

Ttt

Lag 11-10-2008 07:57 AM

Up

Lag 11-11-2008 08:52 AM

Bump

Lag 11-14-2008 09:32 AM

Ttt

Lag 11-14-2008 03:53 PM

Bump

Lag 11-15-2008 12:17 PM

Ttt

xM P0W3Rx 11-15-2008 08:09 PM

Location?

nleksan 11-17-2008 12:54 AM

Could the intake manifold and individual throttle bodies be retrofitted to an M52TU28? Seeing as it's a mechanical throttle and not electronically controlled like the M54, should it not be fairly easy to convert?

Lag 11-17-2008 06:28 AM

I am in Milwaukee WI, and I do ship. I am not sure on the fitment on an M52, but I am not selling the throttle bodies, only the intake manifold, injectors and fuel rail. Thanks!!

Skeeter 11-18-2008 07:15 PM

Quote:

Originally Posted by nleksan (Post 8905538)
Could the intake manifold and individual throttle bodies be retrofitted to an M52TU28? Seeing as it's a mechanical throttle and not electronically controlled like the M54, should it not be fairly easy to convert?



No. No.

Lag 11-19-2008 08:33 AM

Thanks for the clarification.

Lag 11-21-2008 11:48 AM

Bump

thearmyman83 11-22-2008 04:08 PM

you sellin gthe altenator?

brunnomiami 11-22-2008 09:11 PM

i need the temperature control for the alside temperature

Lag 11-24-2008 10:03 AM

Sorry, I do not have the alternator for sale, not the temperature control.

Lag 11-24-2008 10:03 AM

I only have the items above for sale.

Lag 11-25-2008 08:42 AM

Bump

Lag 11-27-2008 08:12 PM

Ttt

Lag 11-29-2008 02:13 PM

Bump


All times are GMT -5. The time now is 10:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use