E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   The Tire Rack's Tire & Wheel Forum (http://forum.e46fanatics.com/forumdisplay.php?f=6)
-   -   Fitting 19x10.5 et25 on e46 non-M (http://forum.e46fanatics.com/showthread.php?t=733703)

TiAg2247 01-14-2010 10:21 AM

Fitting 19x10.5 et25 on e46 non-M
 
Yes you read that right. I know I'll have to shave the fender lips and raise the rear a little AND stretch the tire, dial in more negative camber... But will that be enough? Might even machine off 5mm of the hub to bring it to et30. Right now with a 19x9.5 et45 I am nowhere near flush, I'm hoping the new setup won't stick out atrociously.

Poke and stretch / wheel fitment gurus, help me do it without excessive bodywork!

Activ3 01-14-2010 11:46 AM

Imagine your car with a 20mm spacer.. almost.

Throw a 245/35/19 on it and I'm pretty sure you can make it work.

SIN3 01-14-2010 12:14 PM

this can be done but the 10.5 has to have a low offset. i put a 10 VB3 at et33 and with no tire it came to the fender. i am sure with some camber you can do it but i would suggest running 245-255 max 30/35 series anything more and you cannot lower you car drasticly.

OR

if you getting wheels with custom offsets have the offset in the 40s

TiAg2247 01-14-2010 01:23 PM

I was sticking to a 255/30 at most. I'll have to crunch numbers once the wheels arrive :4ngie:

TiAg2247 02-15-2010 08:04 PM

Alright it's down to either a 245/35/19 Kumho SPT or FK452; or a 255/30/19 Toyo T1R or Kumho SPT. I'm hoping to pull it off with the 255. Going to see how tight the wheels fit when they arrive next week. Can't wait!!!

BMW-UDM 02-15-2010 09:03 PM

its def doable, without question! I be running something wider and in lower offsets OP, go for and dont look back... :)

yes non-m as well.... dont let ppl who dont know anything abt wheel fitment tell you otherwise :thumbsup: (not referring to any previous posts on this thread) :thanks:

SteelGray3 02-15-2010 09:07 PM

Quote:

Originally Posted by BMW-UDM (Post 11328846)
its def doable, without question! I be running something wider and in lower offsets OP, go for and dont look back... :)

yes non-m as well.... dont let ppl who dont know anything abt wheel fitment tell you otherwise :thumbsup: (not referring to any previous posts on this thread) :thanks:

Let the punka$$ 17 year old tell you. :rofl:


(I'm helpin this indecisive mofo pick his wheels and specs lolz)

BMW-UDM 02-15-2010 09:10 PM

spec are done, mofo :rofl: which some M3 done even run lol just need to figure out the finish! :shhh:


All times are GMT -5. The time now is 07:26 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use