E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   DIY: Do It Yourself (http://forum.e46fanatics.com/forumdisplay.php?f=27)
-   -   MVRK's Interior Trim Cloth Wrap DIY (http://forum.e46fanatics.com/showthread.php?t=748743)

mvrk10256 03-15-2010 11:46 AM

MVRK's Interior Trim Cloth Wrap DIY
 
12 Attachment(s)
So sometimes you just get tired of the old interior trim. And that means you have to either replace it, paint it, wrap it in CF, or a fabric. Fabric lets you have something that is both unique and has texture. :str8pimpi


DISCLAIMER: you fvck up its not on me.

Supplies:
3M Super 77
ScotchGuard
1 yard of fabric (2 if you are doing c pillars as well)


http://forum.e46fanatics.com/attachm...1&d=1268670338

Tools:
Flathead and Phillips screwdriver
scissors - sharp and small is nice too.
several flat clean surfaces.


So first we need to do a test run.

TEST RUN:


1. cut a small piece of fabric
2. scotchgaurd it
3. stick it onto something you dont care about
4. let it dry

http://forum.e46fanatics.com/attachm...1&d=1268670338

5. Visual inspection - is anything staining, does the glue make it look wrong, is it bleeding ect.....
6. try water test and the rub test, no pigment should come off on your hand.

http://forum.e46fanatics.com/attachm...1&d=1268670338


so if everything is good we can move on to the wrap.

STEP A: Scotchgaurd everything
1. place the whole sheet of fabric on the floor or a large table
2. give it 3/4 light coats of gaurd
3. Let it dry

http://forum.e46fanatics.com/attachm...1&d=1268670338


STEP B: Wrapping Trim pieces



1. Pull trim pieces
2. wash with soap and water, get all the armor all/finger oil and everything else off the pieces
3. take them to a table with fabric, cut a piece of fabric around the trip piece with plenty of spare room

http://forum.e46fanatics.com/attachm...1&d=1268670338

4. take to a separate clean surface and place the trim, trim side up, spray it with super 77 from about 12 inches with quick strokes(basically same technique as spray paint)
5. take your strip and place it on the glue part
6. VERY IMPORTANT: immediately stretch/rub it smooth. make sure there are no bubble or wrinkles while the glue is still wet.
a. this is easy to do on all the pieces except the long curved one in front of the passenger. what you need to do here is cut a large piece and start from the left, go about 3 inches and make a cut from the edge of the fabric to about a centimeter away from the trim piece. this will allow the fabric to "bend" w/o causing bubbles.
b. The trick to corners is this. wrap like you would a present. so you get this triangular thing sticking up with fabric stuck to itself. then simply snip it off. that way there is a great perfect corner, but no material sticking up in the back.

http://forum.e46fanatics.com/attachm...1&d=1268670338

7.now that you are all flush and even on the other side, flip the trim piece.
8. fold the fabric over and use the scissors to trim the fabric in such a way that it will only wrap around the edge a little,and doesn't get in the way of the pegs. When wrapping the shifter piece, you will need to cut to the corners of the holes for the switches and scissors. it is important that your wrap as close to the corners as possible to avoid bunching and so the switches fit.

http://forum.e46fanatics.com/attachm...1&d=1268670338

http://forum.e46fanatics.com/attachm...1&d=1268670338


9. spray the backside with super 77
10. wrap the trim around and let it stick to the back of the trim
11. look over your work and rewrap if necessary.
12. reinstall everything in the car and enjoy.


http://forum.e46fanatics.com/attachm...1&d=1268670338

http://forum.e46fanatics.com/attachm...1&d=1268670338

UNFORGIVEN 03-15-2010 12:03 PM

I don't really like that print, but that's what makes us all different. :thumbsup:

Thanks for the DIY. You made it all so simple. Love the disclaimer. :lmao:

mvrk10256 03-15-2010 12:17 PM

Quote:

Originally Posted by UN4GIV3N (Post 11468776)
I don't really like that print, but that's what makes us all different. :thumbsup:

Thanks for the DIY. You made it all so simple. Love the disclaimer. :lmao:

unfortunatly my camera is POS, and it doesnt do the fabric justice.

It looks really excellent in person, kind of subdued and classy, but i was at a party last night, and i had to give some chicks a ride back to campus, and i got a few compliments :4ngie:

Stew330i 03-15-2010 12:17 PM

Looks great good job!

mvrk10256 03-15-2010 06:45 PM

Quote:

Originally Posted by Stew330i (Post 11468853)
Looks great good job!


:thanks:

miiikey31 03-15-2010 10:05 PM

are you doing your mom's car? jk
good diy

Define ///M3 03-15-2010 10:09 PM

haha now you just need curtains and some plush pillows for the back seet and its already more luxurious then my house!

syl3ntforce 03-15-2010 10:24 PM

whats a good fabric to wrap the trim in everyone has cf so im tired of that look where can i find good fabric that wont bleed and that the pigments wont rub off on your hand?

thanks

very good DIY

mvrk10256 03-16-2010 01:46 AM

Quote:

Originally Posted by miiikey31 (Post 11471762)
are you doing your mom's car? jk
good diy

:facepalm::rofl:


Quote:

Originally Posted by Define ///M3 (Post 11471792)
haha now you just need curtains and some plush pillows for the back seet and its already more luxurious then my house!

:str8pimpi

what can i say. i is classy.


Quote:

Originally Posted by syl3ntforce (Post 11471867)
whats a good fabric to wrap the trim in everyone has cf so im tired of that look where can i find good fabric that wont bleed and that the pigments wont rub off on your hand?

thanks

very good DIY

basically i test sprayed some flannel, and some linen. I would say the linen works best because you need a thin fabric. especially when wrapping the shifter trim. CF is gay, everyone has it, and while it looks ok its really not unique.. basically goto Joannes and buy the scotchgaurd and glue, and buy 6" strips of several fabric you like.

then simply spray them and glue them to a milk bottle or some plastic and see how it looks. i cant tell you one fabric will work best, just gotta experiment. :4ngie:

Jmanscotch 03-18-2010 07:28 AM

I'm liking your idea, a lot cheaper then replacing the trim, thanks!

My only concern would be that after a while I'd get tired of the look and want to change it up, does the 3M super 77 set up real solid or do you think you could peel off the fabric and use something like WD40, Goo Gone etc to remove the glue residue thus returning the trim to its previously appearance?

I might just have to try it on some scrap platic and give it a shot....

mvrk10256 03-18-2010 01:11 PM

Quote:

Originally Posted by Jmanscotch (Post 11483887)
I'm liking your idea, a lot cheaper then replacing the trim, thanks!

My only concern would be that after a while I'd get tired of the look and want to change it up, does the 3M super 77 set up real solid or do you think you could peel off the fabric and use something like WD40, Goo Gone etc to remove the glue residue thus returning the trim to its previously appearance?

I might just have to try it on some scrap platic and give it a shot....

It peels off pretty easily, however i do not know if you will be able to return it to the original finish, its possible but it would take quite a bit of goo gone and a lot of creditcard scraping.

my suggestion is if you get bored, wrap it in something else, or sand it and spray it.

LehiZHP 03-18-2010 01:50 PM

Tell me you're only kidding! What's next? Dingle balls and a furry kitty in the back window? Maybe a nice pastel floral print?:rofl:

mvrk10256 03-18-2010 01:53 PM

Quote:

Originally Posted by LehiZHP (Post 11485223)
Tell me you're only kidding! What's next? Dingle balls and a furry kitty in the back window? Maybe a nice pastel floral print?:rofl:

:woot:

yup pink faux fur, and big pink furry dice actually. The pictures dont really give it justice the black blends perfectly. took it out to a meet last night, and got tons of compliments.

syl3ntforce 03-19-2010 12:49 AM

thanks for the info i was searching joannes but i didnt like the print on the fabric im looking for something more abstract any other places you could recommend ? thanks

mvrk10256 03-19-2010 12:53 AM

Quote:

Originally Posted by syl3ntforce (Post 11488218)
thanks for the info i was searching joannes but i didnt like the print on the fabric im looking for something more abstract any other places you could recommend ? thanks

google maps your adress and search for fabric near you. There is a a place near me called fabric fabrique that had cool ****. mostly places that do dresses and stuff.

kushy 03-19-2010 01:45 AM

Love the way it turned out. Thumbs up!

mvrk10256 03-19-2010 02:02 AM

Quote:

Originally Posted by kushy (Post 11488419)
Love the way it turned out. Thumbs up!

thanks. :thumbsup::thanks:

Brilliant 03-20-2010 08:01 PM

What about a headliner to match?

mvrk10256 03-20-2010 08:52 PM

Quote:

Originally Posted by Brilliant (Post 11495157)
What about a headliner to match?

maybe a bit much to do the whole headliner. May do the dome light/sensor thing between the front seats though.

rEid46_323 03-24-2010 04:40 PM

Quote:

Originally Posted by mvrk10256 (Post 11485021)
It peels off pretty easily, however i do not know if you will be able to return it to the original finish, its possible but it would take quite a bit of goo gone and a lot of creditcard scraping.

my suggestion is if you get bored, wrap it in something else, or sand it and spray it.

pull the fabric, sand off glue, put on new fabric

Quote:

Originally Posted by LehiZHP (Post 11485223)
Tell me you're only kidding! What's next? Dingle balls and a furry kitty in the back window? Maybe a nice pastel floral print?:rofl:

:pfft: it looks b1tchin in person. its so subtle u might miss it at first. people get in and are like did the car come from the factory like this cuz your :cristina: is sorta ballin.


Quote:

Originally Posted by Brilliant (Post 11495157)
What about a headliner to match?

that would be overkill.

i would :hitit:


All times are GMT -5. The time now is 09:25 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use