E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Suspension & Braking Forum by BimmerWorld (http://forum.e46fanatics.com/forumdisplay.php?f=97)
-   -   Zimmerman Coated Z Rotors question. (http://forum.e46fanatics.com/showthread.php?t=800163)

E46Doc 10-23-2010 08:12 PM

Zimmerman Coated Z Rotors question.
 
I've read on this site that it is necessary to remove the coating from the rotors (except for the top hat) when installing new brakes. When I opened up the box with the new rotors in yet, I found a manufacturer's note stating "Installaion ready! Do not remove protective coating." I'm kind of at a loss as of now. TIA. :)

BimmerBrakes 10-24-2010 03:32 PM

NO CLEANING IS NEEDED. Just install and drive about 200 miles before beddin. :D

-Anthony@BimmerBrakes

maxi 10-31-2010 07:32 AM

Zimmerman.... good choice freind, this is the OEM supplyer I think..

hummer 11-03-2010 12:19 PM

There seemed to be an oily coating that doesn't need to be removed and then there is the Z coat that is on the swept area. When braking for the first few times this coating will be worn away. Don't be freaked out! There will be NOISE and VIBRATION involved but it goes away quickly.


All times are GMT -5. The time now is 02:18 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use