M54 Engines & Misc. (Vanos, DISA, Pistons, Etc.)
 

Ask me about any engine parts you may be looking for that aren't listed...from sensors to camshafts...there are simply too many to list here. Also, I'd be glad to answer any questions and snap pictures of the items that don't have them.

DISA (air adjuster unit) for 325 $50
http://i623.photobucket.com/albums/t...3/DSC02344.jpg
Valve Cover (screw in coil style) $40
NOTE: There is a chip that is marked by the arrow in the picture. This valve cover isn't perfect but IS completely functional and would be great for a cheap replacement or an extra.
http://i623.photobucket.com/albums/t...3/DSC02342.jpg
Ignition Coils (screw in style) $40 for all six
http://i623.photobucket.com/albums/t...3/DSC02333.jpg
Throttle Body for 325 $70
http://i623.photobucket.com/albums/t...3/DSC02337.jpg
http://i623.photobucket.com/albums/t...3/DSC02340.jpg
http://i623.photobucket.com/albums/t...3/DSC02341.jpg
Injectors for 325 $60 for all six
http://i623.photobucket.com/albums/t...3/DSC02329.jpg
Rods & Pistons for 330
NOTE: Wrist pins included.
http://i623.photobucket.com/albums/t...3/DSC02348.jpg
http://i623.photobucket.com/albums/t...3/DSC02349.jpg
Valves, Valve Springs, Seats, and Retainers $200 for the complete set
NOTE: Intake on left, exhaust on right.
http://i623.photobucket.com/albums/t...3/DSC02350.jpg
CCV (Oil Separator) $25
http://i623.photobucket.com/albums/t...3/DSC02334.jpg
Fan $20
http://i623.photobucket.com/albums/t...3/DSC02328.jpg
Water Pump (OEM) $15
http://i623.photobucket.com/albums/t...3/DSC02331.jpg
Pulleys (OEM water pump and power steering) $20
http://i623.photobucket.com/albums/t...3/DSC02343.jpg
Intake Boot for 325 (upper) $5
http://i623.photobucket.com/albums/t...3/DSC02330.jpg
Spacer Ring for 325 $2
http://i623.photobucket.com/albums/t...3/DSC02336.jpg
Wheel Well Covering, NEW $25 (cost is $39.54 from Tischer)
NOTE: This is for the drivers side, it holds the ambient temperature sensor.
http://i623.photobucket.com/albums/t...3/DSC02345.jpg
http://i623.photobucket.com/albums/t...3/DSC02347.jpg

Rods & Pistons for 325 $150
NOTE: Wrist pins included.

Vanos $150
NOTE: Both solenoids are included.

Oil Pump $150
NOTE: Chain gear and nut included.

Oil Pan $100

Dibs on the ignition coils! What is the age / mileage on them? Will they fit in a 2000 328Ci?

Thanks!

I want the wheel well covering that holds the ambiant temp sensor. Im not to sure exactly from that pic where it goes in but would love to purchase if you could send me a pic with a arrow that shows where it goes in. Please consider that item sold

:)

valve cover shipped to 33967? Thanks

Sorry, somebody sent me payment for that item about fifteen minutes after I posted.

PM sent

Bump...

Wheel well liner and coils sold.

Per my PM I'll take the DISA valve. Thanks!

do you have the ambient temp sensor?

thanks,

Wouldn't happen to have the passenger side front fender lining?

whats the mileage on these?

It depends on what the part is as they are from several different engines. Please PM me regarding specific parts.

Nick

Have you had a chance to ship the DESA valve?

Thanks

Is this rod and piston for 330? how much is it? how much miles on it?

OP, you still with us? :hmm:

Same here, but was covered by paypal. Hopefully the seller is in good health. I still want the DISA valve!

interested in the oil pan...

OP clear your inbox man :)

Ignition Coils
 

interested in ignition coil. tried sending pm. your inbox is full. anyways, are these still available? if so, mileage, condition, will they fit '02 non-sport 325i 4dr, price shipped to CA 90025? need them asap. thanks.

mail box is full. cant pm. but i notice the crack on the valve cover but is it cracked to the part where the gasket sits? how much ship to 91763