E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Engine & Performance (http://forum.e46fanatics.com/forumdisplay.php?f=36)
-   -   FS: Schrick 260/268 FI Cams (http://forum.e46fanatics.com/showthread.php?t=811009)

Samir 12-15-2010 07:14 PM

FS: Schrick 260/268 FI Cams
 
Custom set produced by Schrick. These are designed for forced induction applications (either supercharged or turbocharged E46 M52TU/M54/M56 engines) and will make big power over the stock cam, depending on your boost level. Retail for $1400, asking $900 or best offer. These include the factory spline gears, which are already calibrated for the double vanos system <= that's a major plus during installation as most mechanics do not have the necessary tool to do this. Simply drop them in, set TDC and you're done.

Specs...

Intake cam duration: 260
Intake cam lift: 10.9mm

Exhaust cam duration: 268
Exhaust cam lift: 11.0mm

http://www.g-powerusa.com/images/ebay/IMG_0001.jpg
http://www.g-powerusa.com/images/ebay/IMG_0003.jpg

Iceman00 12-18-2010 11:55 AM

Can I swap the intake and exhaust cam? Or buy just one :P

cosmos328Ci 11-21-2012 03:56 PM

Schrick
 
Quote:

Originally Posted by Samir (Post 12580349)
Custom set produced by Schrick. These are designed for forced induction applications (either supercharged or turbocharged E46 M52TU/M54/M56 engines) and will make big power over the stock cam, depending on your boost level. Retail for $1400, asking $900 or best offer. These include the factory spline gears, which are already calibrated for the double vanos system <= that's a major plus during installation as most mechanics do not have the necessary tool to do this. Simply drop them in, set TDC and you're done.

Specs...

Intake cam duration: 260
Intake cam lift: 10.9mm

Exhaust cam duration: 268
Exhaust cam lift: 11.0mm

http://www.g-powerusa.com/images/ebay/IMG_0001.jpg
http://www.g-powerusa.com/images/ebay/IMG_0003.jpg

I would like to buy your cams, I have sent you a PM.

Cheers

cosmos328Ci 11-24-2012 07:12 AM

Quote:

Originally Posted by cosmos328Ci (Post 14918065)
I would like to buy your cams, I have sent you a PM.

Cheers

Quote:

Originally Posted by Samir (Post 12580349)
Custom set produced by Schrick. These are designed for forced induction applications (either supercharged or turbocharged E46 M52TU/M54/M56 engines) and will make big power over the stock cam, depending on your boost level. Retail for $1400, asking $900 or best offer. These include the factory spline gears, which are already calibrated for the double vanos system <= that's a major plus during installation as most mechanics do not have the necessary tool to do this. Simply drop them in, set TDC and you're done.

Specs...

Intake cam duration: 260
Intake cam lift: 10.9mm

Exhaust cam duration: 268
Exhaust cam lift: 11.0mm

http://www.g-powerusa.com/images/ebay/IMG_0001.jpg
http://www.g-powerusa.com/images/ebay/IMG_0003.jpg


Have you already sold these cams?

willsbma 11-28-2012 05:18 PM

would they do anything on a stock motor?

Steven747 11-28-2012 06:07 PM

Quote:

Originally Posted by willsbma (Post 14935167)
would they do anything on a stock motor?

i think the exhaust duration is to high and idle wouldent be good on stock tune

bees323 11-30-2012 09:54 PM

Chk ur pm

Steven747 12-01-2012 07:37 PM

Man I would love to invest in these for when I go f/I but I heard my 264/248 can still make some nice power over stock cams

bees323 12-07-2012 05:31 PM

Still interested !!! .. Haven't heard from u do u still have them?

MachRc 12-07-2012 06:01 PM

guys this was posted in 2010, Samir is (from last time I talked to him in person) in Germany with G power. It highly very likely been sold years ago.


All times are GMT -5. The time now is 08:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use