E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Pacific Northwest (http://forum.e46fanatics.com/forumdisplay.php?f=55)
-   -   HPF Subframe / RTAB / Lower Control Arm Group Buy (http://forum.e46fanatics.com/showthread.php?t=813182)

HPF Chris 12-28-2010 06:35 PM

HPF Subframe / RTAB / Lower Control Arm Group Buy
 
We're going to do a group buy on the HPF subframe reinforcement plates and installation along with RTAB's, subframe bushings and lower control arms.

E46 Standard Parts Pricing

$155.96 - HPF Subframe Reinforcement Kit
$ 79.00 - Powerflex RTABs
$205.25 - Powerflex Subframe Bushings
$312.32 - SPC Rear Lower Control Arms

E46 Standard Labor Pricing

$800.00 - Subframe Reinforcement
With Subframe Reinforcement
$187.50 - RTAB's
$312.50 - Subframe bushings
$187.50 - Lower Control Arms

RTAB's (without subframe reinforcement) - $250.00

GROUP BUY SPECIAL 20% OFF ABOVE PRICES
For this group buy, you can take 20% off both parts and labor. The group buy is for all customers that bring your car to our facility at 12905 NE Airport Way, Portland, OR 97230 until the end of January 2011. We recommend having us do a 4 wheel alignment on your vehicle after this work is done which is $150.

Chris.

Powerflex RTABs

http://www.horsepowerfreaks.com/imag...ng_Arm_LRG.jpg

Powerflex Subframe Bushings

http://www.horsepowerfreaks.com/imag...bframe_LRG.jpg

HPF Subframe Reinforcement

http://www.horsepowerfreaks.com/imag...Plates_LRG.jpg

SPC Lower Control Arms (-1 to +4 degrees adjustment)

http://www.horsepowerfreaks.com/imag...s_Rear_LRG.jpg

thesixsins 12-29-2010 11:13 AM

M3 only?

HPF Chris 12-29-2010 03:14 PM

Quote:

Originally Posted by thesixsins (Post 12625756)
M3 only?

This deal is for the entire E46 platform :)

Here are some differentials and subframes we did on other e46s.

http://www.horsepowerfreaks.com/misc...ame/derek2.jpg

http://www.horsepowerfreaks.com/misc...ame/derek3.jpg

http://www.horsepowerfreaks.com/misc...ame/derek5.jpg

http://www.horsepowerfreaks.com/misc...me/derek10.jpg

http://www.horsepowerfreaks.com/misc...me/derek11.jpg

http://www.horsepowerfreaks.com/misc...me/derek20.jpg

http://www.horsepowerfreaks.com/misc...me/derek21.jpg

http://www.horsepowerfreaks.com/misc...me/derek22.jpg

http://www.horsepowerfreaks.com/misc...me/derek23.jpg

http://www.horsepowerfreaks.com/misc...me/derek30.jpg

http://www.horsepowerfreaks.com/misc...me/derek31.jpg

http://www.horsepowerfreaks.com/misc.../subframe1.jpg

http://www.horsepowerfreaks.com/misc.../subframe2.jpg

http://www.horsepowerfreaks.com/misc.../subframe3.jpg

http://www.horsepowerfreaks.com/misc.../subframe4.jpg

http://www.horsepowerfreaks.com/misc.../subframe5.jpg

http://www.horsepowerfreaks.com/misc.../subframe6.jpg

http://www.horsepowerfreaks.com/misc.../subframe7.jpg

http://www.horsepowerfreaks.com/misc.../subframe8.jpg

http://www.horsepowerfreaks.com/misc.../subframe9.jpg

SOLID MOUNTS - They are actually pretty smooth to drive on!

http://www.horsepowerfreaks.com/misc...uspension2.jpg

http://www.horsepowerfreaks.com/misc...uspension3.jpg

http://www.horsepowerfreaks.com/misc...uspension4.jpg

http://www.horsepowerfreaks.com/misc...uspension5.jpg

http://www.horsepowerfreaks.com/misc...uspension6.jpg

Mikeyjakus 01-01-2011 11:22 PM

[QUOTE=HPF Chris;12626628]This deal is for the entire E46 platform :)

I've been shopping for reinforcement kits, and I thought from your website that your kit was only for M3's. I would much prefer it since it's thicker, will it indeed fit on any e46?

HPF Chris 01-03-2011 03:03 PM

[QUOTE=Mikeyjakus;12636602]
Quote:

Originally Posted by HPF Chris (Post 12626628)
This deal is for the entire E46 platform :)

I've been shopping for reinforcement kits, and I thought from your website that your kit was only for M3's. I would much prefer it since it's thicker, will it indeed fit on any e46?

Oh yes, it fits on all E46's. We've installed them on 325's, 330s and M3s so far. We've run over 1,000rwhp with these and raced with them and no cracking. I don't think you'll need them thicker. :)

Chris.

juju396 01-03-2011 11:47 PM

What's the turnaround time for this Chris? Also, is it really advantageous to use Powerflex Rtabs vs Oem for street? Thx.

HPF Chris 01-04-2011 11:57 AM

Quote:

Originally Posted by juju396 (Post 12644188)
What's the turnaround time for this Chris? Also, is it really advantageous to use Powerflex Rtabs vs Oem for street? Thx.

If you schedule it with us in advance, you can drop it off in the am and pick it up at the end of the day. :)

Chris.

YGOSLO 10-29-2012 03:27 PM

I know this is old, but tell me you're doing this again this year. Just found out yesterday that I am in need...

HPF Kirk 10-29-2012 07:03 PM

PM Sent!

Group buy is on again until the end of the year! :thumbsup:

YGOSLO 10-29-2012 09:56 PM

Replied.


All times are GMT -5. The time now is 11:49 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use