![]() |
Headlights stay on/ turn signal doesn't work
Hi, I need some help on repairing my 2002 BMW 325i, it was pouring rain as I ran to my car, I opened the door and lots of water got on my headlight switch and dash, now the headlights stays on when I start the car even with the headlights switch to off, the light for the cluster dimmer is out, and my turn signals does not work, does anybody help me please?
|
take out your light switch and dry it using an office duster. put it back on an hour later. see if that fixes your problem
|
LCM is in failsafe mode. You may need a new one. If drying it doesn't fix it, send me a PM. I've got an uncoded LCM that I can sell pretty cheap
|
I tried drying it with an office duster, it did not work so I bought a new switch unit from eBay for $40, if that don't work I'll try the LCM, thanks guys
|
Hi,
I am having a similar problem. On my 325 2002 e46 some water leaked through, now one of headlight's comes on when I do the following for 2 minutes and then turns off : 1. Unlock the car via key remote 2. lock the car via the key remote 3. open a door. Any ideas if this is related to the lcm? |
have the same problem, Did you end up getting a new LCM? or was there easier fix?
|
| All times are GMT -5. The time now is 02:25 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use