E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   DIY: Do It Yourself (http://forum.e46fanatics.com/forumdisplay.php?f=27)
-   -   lease Help with Peak Codes Table 1b: 43 and b8 (http://forum.e46fanatics.com/showthread.php?t=848553)

granny shifter 06-03-2011 11:37 PM

lease Help with Peak Codes Table 1b: 43 and b8
 
Hello,
I have been frustrated with the fault codes I have had for almost 2 years on my E46 M3 with no one with a solution. I have the following codes:

Table 1b: 43 and b8
43: Intake camshaft VANOS advance valve
b8: Intake camshaft VANOS position control

I have replaced both the VANOS actuator and solenoid and I doubt it could be the VANOS exhaust sprocket, could it be something as simple as an intake camshaft position sensor? The car does run fine. It starts up perfectly and does not produce any weird noises. It is in limp mode. Thanks again.

granny shifter 06-06-2011 12:45 AM

Anyone?


All times are GMT -5. The time now is 03:57 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use