E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Suspension and Braking (http://forum.e46fanatics.com/forumdisplay.php?f=35)
-   -   FS: Powerflex Control arm Bushings in Housings (http://forum.e46fanatics.com/showthread.php?t=852523)

alumniu 06-22-2011 11:43 AM

FS: Powerflex Control arm Bushings in Housings
 
Cleaning out my basement and came across these CABs that I bought years ago from Bimmerworld and are just barely used. They were installed on my '02 330i for less than 100 miles before I found out that the dealership would have replaced them under my extended warrantee. So I had them replace with OEM and have been meaning to sell these for years but never had the motivation. Ill include the CABs with the housings, packet of lube (only half left), the original receipt, install instructions, and original box they were shipped in for $120 shipped.
Photobucket
Photobucket
PhotobucketPhotobucketPhotobucketPhotobucketPhotobucket

EafersMs 06-22-2011 12:25 PM

Would this work on an M3?

alumniu 06-22-2011 02:23 PM

I don't think these will work on an M3. Different size I believe.

alumniu 06-23-2011 02:31 PM

Any interest for $110 before ebay'd?

Steven747 06-23-2011 02:52 PM

are these as aggressive as the yellows?

alumniu 06-23-2011 04:00 PM

Bushings come in pre-determined durometers (measured hardness) from Powerflex to work best in each particular location. Durometers ranging from 70A(Yellow), 80A(Purple), and 95A(Black). 70A is slightly harder than rubber and works great for drivers looking for a slight increase in chassis response. 70A is not suggested in certain location due to its lack of rigidity. 80A is noticeably harder than rubber and makes a great performance street material that retails low levels of NVH (noise, vibration, harshness). 95A is the hardest, and can be used in certain locations with minimal NVH. For most locations, 95A is used for aggressive/track use. - aakmotorsports

alumniu 06-26-2011 03:33 PM

ebay'd

alumniu 07-05-2011 05:24 PM

Didn't sell on ebay. So if anyone is interested let me know.

giantkeeper 07-05-2011 06:16 PM

Shot you a pm

alumniu 07-05-2011 11:50 PM

SOLD! Thanks!


All times are GMT -5. The time now is 12:07 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use