E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   California (http://forum.e46fanatics.com/forumdisplay.php?f=49)
-   -   Looking to get front control arm bushings replaced (http://forum.e46fanatics.com/showthread.php?t=864438)

perucho330i 08-17-2011 06:22 PM

Looking to get front control arm bushings replaced
 
I posted before about this and I am thankful to all for the advice and offers. I had to hold off till now due to funds. I am looking to purchase the powerflex bushings over at modbargains. If anyone around that area is willing and has the experience to install them. Hit me up!

If anyone lives in the san fernando valley area and know retailers who carry them..please let me know...Figure if I am going to drive down to OC might as well get them installed down there.

Thank you all very much....after this I am looking to finally start moding my car lol....muffler delete....corner lights...rims....I have the m-tech 2 front bumper so I may just keep that on there.

BMWCruisn 08-17-2011 06:59 PM

it's SUPER easy to do... just borrow one of these from autozone, get a little dish soap to slide the new ones back on, and you are good to go. no joke.... 30 mins to do it.

http://www.harryepstein.com/pics/1026_4549.jpg

perucho330i 08-18-2011 10:23 AM

thank you for the tip....would you be willing to help? I would pay you for your help lol
I don't have jack stands, nor do I have the know how lol.....I am starting to learn lol

dmax 08-18-2011 10:44 AM

I just feel compelled to present a 'minority opinion' on poly bushings.

Many have gone from OE to poly only to come back to OE. Since the poly last forever according to legend, I think that says something...something which you might want to consider.

If you read as many bushings threads as I have, I think you'd want to reconsider and seriously consider OE, or if not, the Meyle HD. Still rubber, but firmer; the perfect compromise, I think, and one which I'm pretty certain I'll do when the time comes.

ModBargains II 08-18-2011 06:44 PM

I can help you out with that.

I'm not sure if you were aware, but we not only offer parts, but we now offer installs as well!

So you could come down to purchase and install the FCABs all at once.

We are now a one-stop-shop in the OC!

Give me a call at 714.582.3330 x8005 and I can set up an appointment for you!

Best Regards,
Jason
Jason@ModBargains.com

Steven747 08-18-2011 11:04 PM

chealoum installs them for cheap

perucho330i 08-20-2011 01:16 PM

HEY JASON
I was hoping I can pickup some powerflex bushings either today or tomorrow. I know the store is closed but I really need them lol
I have a buddy that will be replacing them on monday( I wanted to have it done at your store but to be honest I am on a budget right now and can't afford the $200 labor cost).
If there is a way I can either purchase them tomorrow or maybe have them waiting for me on monday.
Thank you very much


All times are GMT -5. The time now is 05:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use