E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Site Sponsor Specials and Sales (http://forum.e46fanatics.com/forumdisplay.php?f=77)
-   -   ::. DTM/Euro-Spec: Titanium Heat Treated Exhaust Tips .:: (http://forum.e46fanatics.com/showthread.php?t=873590)

Andrew@euro-spec 09-29-2011 10:22 AM

::. DTM/Euro-Spec: Titanium Heat Treated Exhaust Tips .::
 
Due to High demand, we have brought our Titanium Burnt tips back into production. Our last order of over 100 pairs of tips sold out quite some time ago, but they are back now. We only brought back the weld on type, since the bolt on type was really no good at all.

Tips are of the highest quality, easily installed (weld), and look amazing. Also, we give you the option to pick sizing, so that if you want the look of big tips, you can, if you want average size tips, you can. Below, you will find the sizing available, quantity, and price.

89mm straight cut: 20 pieces
89mm slant cut: 20 pieces
80mm straight cut: 20 pieces
80mm slant cut: 20 pieces
102mm slant cut: 4 pieces ($60/$110 shipped)
102mm straight cut: 4 pieces ($60.00/$110 shipped)

Pricing is as follows: All tips are $50 shipped per tip. For the pair, its $95 shipped. For m3's who need quads, its $175 shipped. Pricing is for all tips, unless otherwise specified above.


http://modeonemedia.com/euro-spec/tips_line_up.jpg

http://modeonemedia.com/euro-spec/tips_80mm.jpg

http://modeonemedia.com/euro-spec/tips_80mm_2.jpg

http://modeonemedia.com/325ci/DSC_4538.jpg

http://modeonemedia.com/325ci/DSC_4552.jpg

http://modeonemedia.com/euro-spec/tips_spacing.jpg

kennyge92 10-06-2011 04:00 PM

how exactly do i preorder these tips? i am sorry i am new to the forums... the tips are for a E92

Andrew@euro-spec 10-06-2011 06:29 PM

pm sent.

-Andrew

SennaSixty8 10-08-2011 04:59 PM

What fits stock m3 quads close in size and length to stock tips?

darksideracer69 10-08-2011 08:59 PM

About time guys :)

Sent from my SGH-T959V using Bimmer

Andrew@euro-spec 10-09-2011 01:53 AM

Quote:

Originally Posted by SennaSixty8 (Post 13680837)
What fits stock m3 quads close in size and length to stock tips?

80mm would probably be good

Quote:

Originally Posted by darksideracer69 (Post 13681289)
About time guys :)

Sent from my SGH-T959V using Bimmer

i know right. had a lot of demand for them, so brought em back.

-Andrew

Au2bahn 10-11-2011 07:58 PM

Is your site still up?

eurorush86 10-11-2011 08:32 PM

I am looking for a 89mm Carbon tip, do you still carry the carbon?

Andrew@euro-spec 10-12-2011 12:28 AM

I might still have a set of carbons yes. Ill PM you.

And yes our site is still up, under a new domain, http://www.dtm-spec.net/v3

-Andrew

ikeupinya 10-12-2011 01:45 AM

Euro-Spec, will the 80mm CF tips fit on a BMW Performance exhaust??? Can't measure it right now, I'm fighting a war in the "A"-Stan!!!

domcreates 10-12-2011 02:05 AM

I'll probably get some of these in the future :)

Andrew@euro-spec 10-12-2011 09:55 AM

Quote:

Originally Posted by ikeupinya (Post 13692591)
Euro-Spec, will the 80mm CF tips fit on a BMW Performance exhaust??? Can't measure it right now, I'm fighting a war in the "A"-Stan!!!

I think it will yeah, ill check it out for you. I dont think i have more then one set of CF tips though, and someone before you PM'ed me. Ill keep you posted.

Quote:

Originally Posted by game-of-stance (Post 13692623)
I'll probably get some of these in the future :)

Cool. :thumbsup:

-Andrew

Vic328CSi 10-13-2011 12:01 AM

will the 80mm tips fit a e46 328ci stock muffler?

PRDesignsTony 10-13-2011 12:22 AM

ive been looking for burnt tips forever, will deff get a quad set in the future

Andrew@euro-spec 10-13-2011 10:00 AM

FOR EVERYONE ASKING ME IF THEY WILL FIT. I CANT BE SURE. ID ASSUME YES, BUT THIS IS WHY I PUT THE GUIDE PICTURE ABOVE. GO OUT TO YOUR EXHAUST, AND MEASURE FROM THE CENTER OF ONE INLET ON THE MUFFLER TO THE OTHER, ITS ITS 3.25" OR MORE, THEN YOUR GOOD TO GO.

ANOTHER WAY IS JUST TO LOOK FROM INSIDE YOUR CURRENT TIPS, AND MEASURE FROM CENTER OF THE LEFT ONE TO THE CENTER OF THE RIGHT ONE, AND AS LONG AS THE TIPS COME STRAIGHT OUT OF THE MUFFLER, THIS SHOULD BE PRECISE AS WELL.

i dont have an e46, or else id check myself, but we sold out of our last shipment, over 100 tips, so id assume they work, but i just want everyone to be clear before ordering. All i need is one person to measure, then everyone else will know.

-Andrew

Andrew@euro-spec 10-20-2011 09:05 PM

Just confirmed tips do fit stock muffler systems!

TIPS JUST ARRIVED TODAY AND ALL PRE ORDERS SHIPPED.

IF I SENT YOU AN INVOICE AND YOU DIDNT SUBMIT, ITS VALID TILL THE END OF THE WEEK, AS THE PRE ORDER PRICES ARE NO LONGER ACTIVE.

PM ME FOR ORDERS AND PRICING.

-Andrew

e46rage 12-10-2011 03:57 PM

were do i order these ? I want 4 tips for a 335i in 89mm for a m3 rep bumper in slanted pay pal ready !

ZkansasZ 01-10-2012 10:03 PM

Quote:

Originally Posted by Andrew@euro-spec (Post 13681929)
80mm would probably be good

-Andrew

Do you have any pic of an m3 with these tips?
Or anyone else does ?
I need to see before I buy :)

Andrew@euro-spec 01-11-2012 12:12 AM

http://i65.photobucket.com/albums/h2..._Exhaust_6.jpg

These are our 89mm tips on an M3. These are also straight cut, slanted also available.

-Andrew

ZkansasZ 01-11-2012 10:14 PM

Quote:

Originally Posted by Andrew@euro-spec (Post 13967239)
http://i65.photobucket.com/albums/h2..._Exhaust_6.jpg

These are our 89mm tips on an M3. These are also straight cut, slanted also available.

-Andrew

Im sold!
Whats the price of those exact tips to 77065 business address please?
I want those for my m3 :)


All times are GMT -5. The time now is 04:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use