E46Fanatics (http://forum.e46fanatics.com/index.php)
-   California (http://forum.e46fanatics.com/forumdisplay.php?f=49)
-   -   eas | In-House Dynojet 224xLC Testing for your BMW - starting at $75! (http://forum.e46fanatics.com/showthread.php?t=874353)

tom @ eas 10-03-2011 12:32 PM

eas | In-House Dynojet 224xLC Testing for your BMW - starting at $75!
As your premier BMW tuner in Socal, we are determined in squeezing maximum power out of your BMW while keeping it as reliable as possible. Our in-house Dynojet 224xLC dyno is the perfect tool to benchmark your BMW (horsepower, torque, air/fuel & boost), and recommend adjustments and/or modifications to increase power levels.

From simple bolt-ons to sophisticated tuning sessions, our support team is on hand to address your needs.

The highly versatile Dynojet Model 224xLC is the perfect choice for tuning your BMW. Based on the 224x dyno, the 224xLC offers the simplicity and ease of use of an “inertia only dyno”, along with advanced testing capabilities of a Eddy Current load style dyno. Perform A-to-B comparison tests to quantify gains from various performance products, or enable the load control feature to perform step, sweep, or road load simulations, being much more effecting than street tuning.


Past Dyno Sessions
http://farm3.static.flickr.com/2535/...4603d8e7_m.jpg http://farm7.static.flickr.com/6067/...18578cdd_m.jpg http://farm7.static.flickr.com/6170/...4002fd1a_m.jpg http://farm7.static.flickr.com/6162/...01308676_m.jpg http://farm7.static.flickr.com/6082/...41cb9f27_m.jpg

http://farm7.static.flickr.com/6068/...fab8705f_m.jpg http://farm7.static.flickr.com/6166/...38086e4b_m.jpg http://farm7.static.flickr.com/6087/...76d3e809_m.jpg http://farm4.static.flickr.com/3154/...d50e8e0f_m.jpg http://farm3.static.flickr.com/2742/...2200d32d_m.jpg

http://farm6.static.flickr.com/5104/...0a780c89_m.jpg http://farm3.static.flickr.com/2631/...eb9f14b3_m.jpg http://farm6.static.flickr.com/5318/...76242cc0_m.jpg http://farm6.static.flickr.com/5302/...5216347b_m.jpg http://farm6.static.flickr.com/5216/...47bfae39_m.jpg

http://farm7.static.flickr.com/6067/...88d82dcb_m.jpg http://farm7.static.flickr.com/6200/...81fa5ca5_m.jpg http://farm7.static.flickr.com/6171/...79a26447_m.jpg http://farm7.static.flickr.com/6209/...0e63e72d_m.jpg http://farm7.static.flickr.com/6156/...94b48daf_m.jpg

http://farm7.static.flickr.com/6179/...5a9e9ffb_m.jpg http://farm7.static.flickr.com/6193/...3b74e29a_m.jpg http://farm7.static.flickr.com/6083/...1613fee2_m.jpg http://farm7.static.flickr.com/6087/...8695551e_m.jpg http://farm7.static.flickr.com/6180/...a11aa307_m.jpg

http://farm7.static.flickr.com/6066/...fb3ba3d0_m.jpg http://farm7.static.flickr.com/6170/...9b2c93eb_m.jpg http://farm7.static.flickr.com/6159/...d3ce3bd3_m.jpg http://farm7.static.flickr.com/6165/...ec0d53cb_m.jpg http://farm7.static.flickr.com/6156/...4cfc03bd_m.jpg

When performing loaded testing, the Eddy Current Load Absorption Unit option utilizes an integrated Torque Cell to quantify power absorption in an ultra precise and consistent manner. The eddy current unit attaches to the roller drum by way of a splined shaft, for the utmost in reliability, consistency and repeatability.

After a dyno session, we will provide you with highly detailed feedback and information about your car's performance. Accurate readings such as horsepower, torque, boost pressure, exhaust temperature, air/fuel ratio and more will allow you to see your cars improved performance when your new modifications are installed.

Dynojet 224xLC Dynometer Specifications
- Maximum Horsepower: 2000 WHP
- Maximum Speed: 200 MPH
- Maximum Torque: 2000 ft/lbs
- Eddy Current Load Absorption Unit, Torque Cell, and dynamic load control software.
- Capable of performing loaded tests, including step, sweep, and wind drag simulation.

The Dynojet 224xLC can perform load tests including step, sweep and loaded roll-on.


Atmospheric Sensing Module
The Atmospheric Sensing Module measures absolute pressure, air temperature, and relative humidity. These measurements are used by the WinPEP dynamometer software to correct power and torque measurements to standard atmospheric conditions according to an SAE, Standard, DIN, JIS, or EEC formula.

WideBand Air/Fuel Ratio System
Tuning with a Dynojet dynamometer has never been easier! With the addition of our WideBand Air/Fuel Ratio System, every dyno run can show you horsepower and torque, and the exact air/fuel ratio. This system is one of the most insightful tuning tools available today! You can easily identify lean or rich trends from idle to redline. Whether tuning a naturally aspirated “all motor” car, or a forced induction screamer, you will know the tune is right.

Eddy Current Load Absorption Unit
When performing loaded testing, the Eddy Current Load Absorption Unit option utilizes an integrated Torque Cell to quantify power absorption in an ultra precise and consistent manner. Loaded test files are then available for review and analysis in the Dynojet software. During a steady state test the dynamometer operator can view torque in “real time”, a great feature when performing live ECM tuning. Additional highlights of this system include a quick and effective calibration routine that can be
accomplished in under a minute.

4 Channel Analog Module
The analog module allows (4) additional 0-5v based sensors to be logged during dyno runs. This allows you to display data such as boost and fuel pressure, along side the HP / TRQ channels. Dynojet has a built in sensor calibration routine that makes the set up simple. You can choose from various supported sensors, or input the data from any 0-5v sensor on the market.

Thermocouple Amp
Enhancing the capabilities of the Analog module, the new Dynojet Thermocouple Amp Module is able to convert any Type K Thermocouple into a 0-5v based analog signal and has a range of 0-2000 degree F version.

Contact Details

Retail Location/ Installation Center:
Come check out our 8000 square foot facility in Anaheim, CA. We install everything we sell.


european auto source
4015 E. Leaverton Court
Anaheim, CA 92807

Directions: Get Driving Directions

Hours of Operations:
Mon - Fri: 9am to 5pm (PST)
Sat - Sun: Closed

Contact Info:
Phone: 866.669.0705
Email: info@europeanautosource.com
Website: http://www.europeanautosource.com

Single Run, Baseline, Before/After as well as Tuning and Shop sessions are available. Group sessions also available.

Contact us today to schedule your service or dyno session.

evilstar 10-04-2011 01:57 AM

how much are the tunes?

Steven747 10-04-2011 04:15 AM

+1 how much are the custom tunes?

tom @ eas 10-04-2011 11:30 AM


Originally Posted by evilstar (Post 13647390)
how much are the tunes?


Originally Posted by steven747 (Post 13647532)
+1 how much are the custom tunes?

Unfortunately, we only offer e46M3 specific tunes.

Turner may be able to provide the Shark Injector in which you would be able to perform before/after runs to measure gains.

peteyM3 10-05-2011 01:04 AM

Very interested. Can I get a price please. 04 M3.

david @ eas 10-05-2011 11:36 AM


Originally Posted by peteyM3 (Post 13651023)
Very interested. Can I get a price please. 04 M3.

Sending you a PM! :)

Steven747 10-05-2011 03:58 PM

I would be intersted in seeing how much my stock car puts down.. Is it a dynojet?

tom @ eas 10-10-2011 11:39 AM

We are open Columbus day!

Contact us for an appointment, schedule is filling up fast.

Mango 10-12-2011 02:08 PM

Dyno seems interesting. Starting at $75--for one run?

But if you guys need custom tuning for your non-Ms, OE Tuning in Van Nuys is a superb option.. see sig.

david @ eas 10-12-2011 06:01 PM


Originally Posted by E46Mango (Post 13694149)
Dyno seems interesting. Starting at $75--for one run?

But if you guys need custom tuning for your non-Ms, OE Tuning in Van Nuys is a superb option.. see sig.

$75 is for one dyno session without AFR or Boost monitoring, which includes 3-4 runs.

david @ eas 11-10-2011 06:55 PM

We'll extend this special for the month of November! Give us a call to set up your Dyno Session!

AMCINK 11-11-2011 02:30 PM

Nice Photos

eas 04-27-2012 04:59 PM

Appointments open!! Call today to schedule your dyno testing!!

eas 05-03-2012 02:34 PM

Dyno Slots open!! Call today to schedule!!

eas 05-11-2012 06:06 PM

Call today to schedule your dyno!!

eas 05-17-2012 04:17 PM

Call today to schedule your dyno today!!

eas 05-21-2012 06:35 PM

Call today to schedule your dyno runs!!


eas 05-24-2012 05:41 PM

Find out how much power you are putting out

Call eas today to schedule an appointment!!


eas 05-31-2012 04:56 PM

Call us today to set up an appointment!


eas 06-14-2012 05:33 PM

Still some spots open!

Contact us today and schedule yours!


All times are GMT -5. The time now is 06:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use