E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   General E46 Forum (http://forum.e46fanatics.com/forumdisplay.php?f=4)
-   -   Suspensions for K&W (http://forum.e46fanatics.com/showthread.php?t=890624)

cyberlando 12-08-2011 03:45 PM

Suspensions for K&W
 
does anyone out there know where to use the key for my KW suspensions to soften up it ride.

there is something in the whole where my strut bar goes that goes to the shocks its a little twisting knob.......

all i wanna do is just soften the ride up a little i understand its a sport suspension which is suppose to ride hard but it must be able to be softened up a little

the car is lowered the front tires are 235 35 19

and the backs are 265 30 19

lcoleman 12-08-2011 04:20 PM

You can change the damping, but it's not really going to improve the ride because the spring rates are fixed. If anything, I'd probably turn the damping up--it might actually help. Nothing worse than a damper that's too soft for the spring.

trippmann 12-08-2011 04:27 PM

kw v1, v2, or v3?

ModBargains III 12-08-2011 04:48 PM

Quote:

Originally Posted by lcoleman (Post 13874459)
You can change the damping, but it's not really going to improve the ride because the spring rates are fixed. If anything, I'd probably turn the damping up--it might actually help. Nothing worse than a damper that's too soft for the spring.

Not necessarily true... You will notice a slightly less stiff ride if you turn it down even if you just have V2's and you can only adjust rebound which still makes it a bit more comfortable. I've done so on my V2's and I notice a huge difference in ride comfort when turned down.

Quote:

Originally Posted by trippmann (Post 13874480)
kw v1, v2, or v3?

Good point... V1's don't have any adjustments, only V2's and V3's.

Devious1 12-08-2011 04:49 PM

front - top of the shock
rear- requires to take the shock off to adjust the damper

cyberlando 12-08-2011 07:27 PM

It says 1001 on there so its the v1 I think not sure.

how do I adjust the dampening where does the key fit......and can you guys tell me wat im looking for and wat direction as far as to soften and stiffen it should I turn


All times are GMT -5. The time now is 06:00 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use