E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Forced Induction Forum Sponsored by Active Autowerke (http://forum.e46fanatics.com/forumdisplay.php?f=41)
-   -   Jeff's HPF M3 Turbo : Dyno (http://forum.e46fanatics.com/showthread.php?t=898558)

jeff_smg 01-21-2012 01:04 PM

Jeff's HPF M3 Turbo : Dyno
 
Hi,

It was time to check the power of my ///M, appointments at Shiftech in Luxembourg this morning.

The best way at 15 PSI and 98 Octanes => 560 PS (500 RWHP) and 555 NM (409 ft.lbf) :

Needs to refine the cartho between 5500 to 6500 RPM :

http://img717.imageshack.us/img717/9017/photo24ls.jpg


Pics :

http://img171.imageshack.us/img171/9582/dsc0038fuy.jpg

http://img6.imageshack.us/img6/4872/dsc00302ld.jpg

http://img37.imageshack.us/img37/3702/dsc0036fw.jpg


See you ...

engtariq 01-21-2012 01:08 PM

Amazing :)

MarcusLSB 01-21-2012 03:11 PM

Gorgeous car. That dyno room is bad ass!

jeff_smg 01-21-2012 03:36 PM

Quote:

Originally Posted by MarcusLSB (Post 14002863)
Gorgeous car. That dyno room is bad ass!

Thanks a lot,

I must to change wheels :eek:

topendusa 01-21-2012 04:54 PM

Very nice. I'm digging the dyno room too.

M369 01-21-2012 04:59 PM

:thumbsup: VERY NICE
au top mon pote

jeff_smg 08-04-2012 10:52 AM

Well ... New mods ... New dyno graph ...

Stock engine and OEM rear exhaust :

648 BHP and 670 NM ! :thumbsup:

http://img402.imageshack.us/img402/5184/m3turbo.jpg

http://img580.imageshack.us/img580/2117/m3turbo2.jpg

http://img341.imageshack.us/img341/8...rbem3turbo.jpg

xixixi 08-04-2012 11:13 AM

Who retuned it? Second graph is much better. Grats!

M369 08-04-2012 11:15 AM

Nice work my friend

02black330ci 08-04-2012 02:19 PM

Graph looks much better this time around man, GREAT work!

jeff_smg 08-04-2012 04:38 PM

Thanks a lot ;-)

Faaaaast vert' loool

HPF Chris 08-04-2012 04:39 PM

Looking good. The first graph looks like it had a little wheel spin at 5,500 rpm :). Great numbers though. I'll get some stickers on their way to you :)

Chris

leletyM3 08-04-2012 06:55 PM

Congrats!!!!

7to3_enthusiast 08-05-2012 09:45 AM

Is this the stage 2 with the old 6776 turbo?

lrinco01 08-05-2012 03:11 PM

Quote:

Originally Posted by 7to3_enthusiast (Post 14629449)
is this the stage 2 with the old 6776 turbo?

+2

Cipri 08-05-2012 04:59 PM

Great results for stock engine!
Isn't 1.2BAR a little to much risk?

EpicM3SC 08-06-2012 09:55 AM

Quote:

Originally Posted by 7to3_enthusiast (Post 14629449)
Is this the stage 2 with the old 6776 turbo?

It's a Stage 1 with the 6776 and custom meth injection ( so it's like a Stage 2 but not the official one )

DOC_Race 08-06-2012 05:05 PM

killer stock block numbers!

7to3_enthusiast 08-06-2012 07:19 PM

Is 5k the normal rpm for max boost on the 6776? Dyno's from the 6766 seem to be coming in around 3800-4000? (Torque curve mimics boost).

Oh and Jeff, your poster posts original power at 343 flywheel hp compared to 647 REAR WHEEL hp tuned.... that's approximately 760 flywheel hp. Might as well compare apples to apples right? That'll look even more impressive and it's not an exaggeration, if anything it's an underestimate.

Cruzer03 08-06-2012 10:07 PM

You need to Joint the MFlight Club!


All times are GMT -5. The time now is 11:26 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use