E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Lighting & Mobile Electronics (I.C.E.) (http://forum.e46fanatics.com/forumdisplay.php?f=37)
-   -   FS:1500w Amp, 7-Band Equalizer..... (http://forum.e46fanatics.com/showthread.php?t=899087)

TwoFastFurYa 01-23-2012 10:50 PM

FS:1500w Amp, 7-Band Equalizer.....
I have a 1500watt Audiofonics ADF-243 Amplifier for sale. Works perfectly!!!
Asking $115 shipped anywhere in the USA!

Product Features:
•2 channel [2 ohm] 300w x 4
•2 channel [4 ohm] 200w x 4
•1 channel mono [4 ohm] 600w x 1
•2 ohm load capacity
•Variable low [30-500hz] pass filter
•Variable high [50-1Khz] pass filter
•Subsonic Filter [10Hz - 100Hz]
•Bass boost
•W x L x H: 270 x 358 x 32mm [10 5/8" x 14 1/16" x 11/4"



Also, I have a Clarion EQS746 7-Band Graphic Equalizer for sale! Works perfectly too! Asking $70 shipped anywhere in the USA!

Product Features:
7-Band Rotary Equalizer
12 dB Boost/Cut at 50 Hz, 125 Hz, 345 Hz, 750 Hz, 2.2 KHz, 6 KHz, and 16 kHz
Auxiliary Input with Source Select Switch
Adjustable Aux Input Sensitivity
Subwoofer Output Level Control
Gold-Plated Preamp Inputs and Outputs
Rotary Volume Control and Fader
6-Channel RCA Outputs
Selectable 60/90 Hz Low-Pass Crossover
Crossover Slope: 12 dB/octave
Maximum Output Level: 7V RMS
Input Sensitivity: 50mV-4V RMS
Signal-To-Noise Ratio (S/N): 105 dB
Frequency Response: 10-50,000 Hz
Total Harmonic Distortion (THD): 0.005 %
Input Impedance: 10K Ohms
Output Impedance: 50K Ohms
Stereo Separation: 82 dB @ 1 kHz
Dimensions: 7" W x 1" H x 4" D


Or can have both shipped for $200 anywhere in the USA!

Text or PM at 863-832-1123 if your interested!

Snik 01-23-2012 10:52 PM

so the eq only has 2 input channels?

TwoFastFurYa 01-23-2012 11:17 PM


Originally Posted by snikwad (Post 14010811)
so the eq only has 2 input channels?

Here ya go:



Snik 01-23-2012 11:24 PM

yeah, im trying to find an alternate to my Audicontrol DQXS, so i need something with 3 input channels. :(
Thanks, but this one isnt for me.

Im gonna have to break down and send it in to them and bit the repair cost.

TwoFastFurYa 01-23-2012 11:30 PM

ok thanks for the interest tho : )

All times are GMT -5. The time now is 01:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use