E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Forced Induction Forum Sponsored by Active Autowerke (http://forum.e46fanatics.com/forumdisplay.php?f=41)
-   -   Inside ASA Supercharger (http://forum.e46fanatics.com/showthread.php?t=899746)

MadChemist 01-26-2012 11:46 PM

Inside ASA Supercharger
 
3 Attachment(s)
Ended up taking apart the supercharger due to an oil leak from the side. Took some pictures to show whats inside. Haven't decided if I want to replace the bearings yet. Let me know what you think. Pretty simple design.

:thumbsup:

lab rat 01-27-2012 11:23 AM

I took apart my twinscrew yesterday. I will post pics in my wagon build thread. Funny coincidence given our forum names :)
How many miles on your compressor? Did you find the source of the leak?

MadChemist 01-27-2012 12:59 PM

Not sure on the mileage. It came with the car so I am guess around 90-100k. The oil leak was the oil ring that seals the two pieces. Using my air compressor. I pressurized the oil system which resulted in oil spraying out the side. Need to fix this one since the one that is currently on the car started to make bearing noises. Once I get that one out, I can replace it with this one and tear that one apart and replace the bearings. Anyone know of a good place to source bearings? Or can I just repack them?

drumbum624 01-30-2012 05:48 PM

Just out of curiosity, which blower is that?

TrippinBimmer 01-30-2012 06:02 PM

^ ASA Blower... TM12 more likely...(what it looks like to me)

MadChemist 02-12-2012 06:57 PM

it is a TM-12. I got move pictures. I'll post tonight. Still trying to find bearing and seals.

xaviman 02-12-2012 07:00 PM

nice, the same one im using. Great kit.

668Ci 12-19-2012 05:50 PM

Going to attempt this soon too. Anybody knows where i can source the seals?

MachRc 12-19-2012 06:52 PM

maybe check with ASA NA.

then I would look into contacting Gpower.

ASA NORTH AMERICA
main: 888-360-5590
email: info@asasc.com

ASA North America
by HP Motorsport
8120 Monticello Ave.
Skokie Illinois 60076

668Ci 12-19-2012 10:03 PM

Thx ive already contacted them.


All times are GMT -5. The time now is 04:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use