E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Engine & Performance (http://forum.e46fanatics.com/forumdisplay.php?f=36)
-   -   FS: New Z4 3.0 shifter (http://forum.e46fanatics.com/showthread.php?t=921595)

lejeunebimmer 05-14-2012 02:22 AM

FS: New Z4 3.0 shifter
(1) New Z4 3.0 shifter.


Mounted, but never used as I didn't like the way it sat.

Will make an excellent ssk, doesn't hit driveshaft or guibo, but it does move neutral slightly up and to the right, not enough to interfere with shifting, but I just didn't like it.

There are some tool marks on the shaft between the rubber bushing, and the pivot ball, the bottom part of the bushing casing is also slightly pinched. All of this was caused by me trying to put a slight bend in it ( it's a straight design) doesn't affect functionality of it, but I prefer full disclosure. Can be seen in the pictures with m holding it to show this slight crimping.





lejeunebimmer 05-15-2012 11:15 PM


Sent from my SPH-M900 using Bimmer App

timotheous7 05-17-2012 11:19 PM

will this be a good fitment for a 00 328i sport. I don't want to bench anything to make it fit.???

lejeunebimmer 05-17-2012 11:31 PM

All of the 5 speed manuals it will fit into, and clear the drive shaft no problem.

It'll give about a 30% reduction in shift effort, you can still get into all gears no problem. The only draw back is that neutral moves slightly up and to the right. Nothing major, but I'm really anal about it so that's why its up for sale.

Sent from my SPH-M900 using Bimmer App

timotheous7 05-17-2012 11:45 PM

I will do 35 shipped to 78240 will u do that. if so we got a deal.

lejeunebimmer 05-17-2012 11:49 PM


lejeunebimmer 05-18-2012 12:13 PM


All times are GMT -5. The time now is 12:01 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use