E46Fanatics (http://forum.e46fanatics.com/index.php)
-   General E46 Forum (http://forum.e46fanatics.com/forumdisplay.php?f=4)
-   -   M-Tech bumper help (http://forum.e46fanatics.com/showthread.php?t=928790)

mpiny17 06-20-2012 10:31 PM

M-Tech bumper help
2 Attachment(s)
Quick question, I would really appreciate some help.

I am purchasing an M-Tech bumper for my 2003 325xi. Instead of having the license plate attachment, is there a way to just get a piece of the black molding for the center?

So that I would have no black license plate molding, just the black molding strip across the bumper.

I want it to look like the attached picture of the silver car, and eliminate the license plate bracket in the other pic

S85FTW 06-20-2012 10:54 PM

Welcome and I see this is your first post. You will be able to answer a lot of your own questions if you search using the search tab in the menu. Chances are, any question you will have has been answered before. If not, then create a thread like you did.

That being said, they do offer a mod where you can put an adapter for your license plate right in that tow hitch square of your bumper so you can attach a front plate.

AW Pegasus 06-21-2012 12:09 AM



Solidjake 06-21-2012 12:10 AM

^ +1

Since you're new you should take the time to search a bit before making a thread. Welcome to the forum.

mpiny17 06-21-2012 10:24 AM

Thanks a lot guys I appreciate the help. Thanks for the advice, glad to be a part of the forums

BeeamW 06-21-2012 01:50 PM

or you could also use this. http://www.skenedesign.com/FPBracket/index.shtml
I just ordered one and haven't received it so not sure about the fitment. But for other fanatics it seemed to have worked. See here: http://forum.e46fanatics.com/showthr...927&highlight=

All times are GMT -5. The time now is 11:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use