E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Suspension and Braking (http://forum.e46fanatics.com/forumdisplay.php?f=35)
-   -   FS: Non-Hydraulic Steering Rack (http://forum.e46fanatics.com/showthread.php?t=936309)

jack.chris328 07-31-2012 09:19 PM

FS: Non-Hydraulic Steering Rack
Was originally from a Z4. Not sure if it was the M or Not. It is in good shape, no play in it. Boots are in good condition. $200.00 picked up or + shipping.

jack.chris328 11-10-2012 06:31 PM

Still available :bump:

jack.chris328 11-21-2012 02:20 PM


jack.chris328 12-11-2012 12:06 AM

Bump for offers.

jack.chris328 12-20-2012 10:28 AM


jack.chris328 01-16-2013 12:41 PM

Still Available!

boongsin12 01-16-2013 08:25 PM

Just a question. Is non hydraulic steering better than hydraulic? What's the benefit?

Sent from my Nexus S 4G using Bimmer App

jack.chris328 01-16-2013 11:16 PM

It is a matter of preference. Also performance wanted. You can eliminate drag on the motor by being able to remove the power steering pump. You will gain a better "feel" of the steering in the car as it will be un-assisted. People who are looking to build a lighter car, a weekend track car, or full on race car for that matter, or people who are just tired of there E46 leaking power steering fluid all over :) would change theirs out for a non-hydraulic rack.

boongsin12 01-17-2013 11:11 AM

I see, free bump for good explanation.

jack.chris328 02-03-2013 12:42 PM


jack.chris328 03-19-2013 01:37 PM


jack.chris328 04-22-2013 08:11 PM


jack.chris328 08-25-2013 08:06 PM

I still have this if anyone wants it.

jack.chris328 12-15-2013 01:10 PM


jack.chris328 01-30-2014 11:36 AM


Alexander13 02-17-2014 02:56 AM

Would you consider posting to Australia? I don't need inner or outer tie rods

Dave 02-17-2014 10:34 AM

I didn't even know they made non-power steering racks for the newer cars.

I want to install this just as an experiment to see what it's like driving with it.

jack.chris328 02-17-2014 02:53 PM


Originally Posted by Alexander13 (Post 16007677)
Would you consider posting to Australia? I don't need inner or outer tie rods

Oh wow. That is quite a ways. Let me look into what it would take to get it there and the cost and I will get back to you.

jack.chris328 08-14-2014 11:28 AM

:bump: for an offer

jack.chris328 10-02-2014 10:19 PM


All times are GMT -5. The time now is 09:40 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use