E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   The Tire Rack's Tire & Wheel Forum (http://forum.e46fanatics.com/forumdisplay.php?f=6)
-   -   fitment question (http://forum.e46fanatics.com/showthread.php?t=942978)

COBYATCH 09-05-2012 07:57 PM

fitment question
 
hey guys,

i'm looking at a set of acs type 2. they're 19x8.5 et15 with 215/35 and 19x9.5 et22 with 235/30. i have cut fenders and am planning to run some camber on these, will i have any clearance issues? i could pull the fenders a bit as well. let me know, thanks!

-coby

rcsummers 09-05-2012 08:11 PM

long story short. Yes.

Jets330 09-05-2012 09:27 PM

Quote:

Originally Posted by rcsummers (Post 14708052)
long story short. Yes.

Nawww. im running 215/225 on 8/9+20 all around. if he runs camber arm's and switches that 235 to a 225, and that 225 to a 215, then easy duz it.

edit. front already has 215.

COBYATCH 09-05-2012 10:20 PM

i had a feeling that the rear tires needed to be switched. thanks guys! also, can anyone give me a rough estimate of how much camber this would be/look like?

Jets330 09-05-2012 10:31 PM

1 Attachment(s)
Quote:

Originally Posted by COBYATCH (Post 14708337)
i had a feeling that the rear tires needed to be switched. thanks guys! also, can anyone give me a rough estimate of how much camber this would be/look like?

both car's here: me and a local, running either 8" or 9" both 20 offset in rears.

COBYATCH 09-05-2012 11:04 PM

looks good! just the right amount of camber i was looking for. thanks again

Jets330 09-07-2012 09:18 AM

Quote:

Originally Posted by COBYATCH (Post 14708452)
looks good! just the right amount of camber i was looking for. thanks again

good luck :woot:


All times are GMT -5. The time now is 12:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use