E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Suspension & Braking (http://forum.e46fanatics.com/forumdisplay.php?f=97)
-   -   Bilstein pss coilovers "any addional parts needed" (http://forum.e46fanatics.com/showthread.php?t=944535)

patrickbmw1 09-14-2012 07:39 AM

Bilstein pss coilovers "any addional parts needed"
 
1 Attachment(s)
Just bought a set of bilstein coilovers for my e46 sedan. I have around 100k miles. Any recommendations on any other parts I should replace on the suspension during install

quiksilver4drM3 09-14-2012 08:19 AM

Definitely replace all 4 shock mounts with quality brands since you doing a stiffer suspension. And I just did this same swap but depending on how low you go you'll have clearance issues with the rear sway bar hitting the control arm. I just decided to buy new links, cut them into sections and weld them to regain clearance. Other than that do the normal check around on the other suspension parts to see what else you need. Good luck post pictures!

patrickbmw1 09-14-2012 08:27 AM

shock mounts
 
if you dont mind, could you post a link where to get those shock mounts. I have a 2001 e46 sedan. Thanks bro.

quiksilver4drM3 09-14-2012 08:49 AM

Thats Front http://www.ecstuning.com/BMW-E46-330...cks/ES2581067/

This is what you need for the rear

http://www.ecstuning.com/BMW-E46-330...cks/ES1843936/

http://www.ecstuning.com/BMW-E46-330...hocks/ES58767/
You don't need the bump stop for the rear but at my shop I just recommend it to the customers anyway. Just a couple dollars extra. Let me know whatever else you need!

patrickbmw1 09-14-2012 08:55 AM

The link u provided for the front strut mount says its fore an e46 with build date after 11/2003. I have 2001 sedan? Thanks again

quiksilver4drM3 09-14-2012 08:57 AM

http://www.ecstuning.com/BMW-E46-330...Front/ES10791/

patrickbmw1 09-14-2012 09:01 AM

I what about the rear for my build date?

quiksilver4drM3 09-14-2012 09:27 AM

Yeaa those are for yours

patrickbmw1 09-14-2012 11:12 AM

ordered, Thanks

quiksilver4drM3 09-14-2012 11:52 AM

Nice! Can't wait to see the turn out of the car


All times are GMT -5. The time now is 06:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use