E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Forced Induction Forum Sponsored by Active Autowerke (http://forum.e46fanatics.com/forumdisplay.php?f=41)
-   -   Who Knows About ASA SK1 Superchargers? (http://forum.e46fanatics.com/showthread.php?t=944640)

2000_328CI 09-14-2012 08:53 PM

Who Knows About ASA SK1 Superchargers?
 
For those who are familiar with ASA supercharger kits, will a kit designed for a 330 work on a 328? Details can be found below. Trying to help out a fellow seller on here :hi:

Kit includes:
-ASA TM-12 blower
-FMIC (air to air)
-Extra Siemens ECU with Stage 1 tune
-Extra fuel rail with upgraded high flow injectors
-Upgraded K&N air filter with heat shield
-All hoses (with extra), pipes, bolts, belt, pulleys

mcr_driver 09-14-2012 09:11 PM

The tuning definitely and probably the hoses are different between the kits, I used to have a asa kit on my 330i. Probably the only things that are sure to work are the blower, CAI and FMCC. but the rails might be different between an 328i and 330i so cross check those PN#'s as well.

cowmoo32 09-14-2012 09:26 PM

Invest in a third pedal instead. You'll save weight, reduce parasitic loss, and get better gas mileage.

2000_328CI 09-14-2012 09:28 PM

Quote:

Originally Posted by cowmoo32 (Post 14732946)
Invest in a third pedal instead. You'll save weight, reduce parasitic loss, and get better gas mileage.

Glad I have a manual transmissions :woot:

kaput 09-14-2012 09:35 PM

It should not work. As far as I know, the 328/325 of the early years is different enough that the 330 and 325s do not work.

2000_328CI 09-14-2012 09:40 PM

Cool kaput thanks bud :bow:

kaput 09-14-2012 09:41 PM

No prob bob.

BimmerBrakes 09-15-2012 12:45 AM

328 and 330 is same stuff. It has a 3" TB so you be ok. If there is any difference. It will be very minor to change.

-Anthony@BimmerBrakes

cowmoo32 09-15-2012 07:54 AM

Quote:

Originally Posted by 2000_328CI (Post 14732951)
Glad I have a manual transmissions :woot:

Really? You used to have an auto didn't you?

Mr Paddle.Shift 09-28-2012 06:37 PM

Zolti @ Autotalent can probably confirmed the details.

brodaiga 09-29-2012 09:08 PM

I have the technik kit with the smaller pulley-8psi

140mm
~8psi
6PK 2390

anyone know the belt part number

brodaiga 09-29-2012 09:13 PM

found it from my old thread lol, it is 6PK2375


All times are GMT -5. The time now is 08:57 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use