E46Fanatics

E46Fanatics (http://forum.e46fanatics.com/index.php)
-   Engine & Performance (http://forum.e46fanatics.com/forumdisplay.php?f=36)
-   -   Any E46 Fs/ft random parts/ shrick cams. (http://forum.e46fanatics.com/showthread.php?t=946862)

325CiMaN 09-25-2012 02:14 PM

Fs/ft random parts/ shrick cams.
 
All came off my 01 325ci, I have a sock oil filter housing, Oil pan, Oil pump, intake manifold needs to be thoroughly cleaned out, throttle body, and AFE throttle body spacer, good disa, oil dipstick tube, two vanos units both need seals, one good timing cover,12 good ignition coils, 2.5 injectors with fuel rail, one new thermostat, and two newer thermostats, one good A/C compressor and two brackets, all A/C hoses that are new, I'm no longer running A/C, I have the condenser but still on my car need to pull it out still, good harmonic balancer. Not to sure on prices just shoot me an offer. May have other random engine parts just ask and I'll look.

Also have a set of shrick cams for a m54b30, but they will work for the m54b25 if you make sure the can timing its absolutely perfect, i had them in my m54b25.. Specs on cams, 264 duration intake/248 duration exhaust 10.5mm intake lift and 10mm lift exhaust VAC valve springs, spring seats, retainers, and locks, VAC racing timing and oil chains, also have a set of stock chains, only has about 300-400 Miles on them, also have new lifters to go with it. Not to sure on cams and springs price, looking for offers no low ballers please. I paid around $2800 for cams and valve train components and chain set ( minus the valves)
I'm in the bay area, i live in Napa CA,
Thanks for looking,
Ron

Sent from my DROID RAZR using Bimmer App

325CiMaN 09-25-2012 02:54 PM

Bump!

Sent from my DROID RAZR using Bimmer App

325CiMaN 09-25-2012 03:50 PM

Bump!

Sent from my DROID RAZR using Bimmer App

///MPR77 09-25-2012 04:21 PM

Pm sent.

325CiMaN 09-25-2012 05:02 PM

Bump!

Sent from my DROID RAZR using Bimmer App

325CiMaN 09-25-2012 06:02 PM

Bump!

Sent from my DROID RAZR using Bimmer App

325CiMaN 09-25-2012 08:31 PM

Bump!

Sent from my DROID RAZR using Bimmer App

rube 09-25-2012 08:50 PM

Spacer
 
1 Attachment(s)
PM'ed U!

325CiMaN 09-25-2012 10:05 PM

Bump!

Sent from my DROID RAZR using Bimmer App

daves325in2012 09-25-2012 10:14 PM

Pmed about thermostat

Sent from my DROIDX using Bimmer App

Steven747 09-25-2012 10:30 PM

Bump for some good goodies

darksideracer69 09-25-2012 10:36 PM

Put some pics up. Don't bump your threads like every couple hours, doesn't make a difference.

Also prices, whats the price for the cams?

325CiMaN 09-25-2012 10:50 PM

Quote:

Originally Posted by darksideracer69 (Post 14762863)
Put some pics up. Don't bump your threads like every couple hours, doesn't make a difference.

Also prices, whats the price for thE cams?

Good point, i will try to get some pics up by Friday. There's allot to photograph lol and for prices i'm just looking for FAIR offers, i don't want to throw done huge number out there and scare everyone off our to small of number and loose my @ss on money. i added more info on the cams.

Sent from my DROID RAZR using Bimmer App

Steven747 09-25-2012 11:52 PM

Quote:

Originally Posted by 325CiMaN (Post 14762891)
Good point, i will try to get some pics up by Friday. There's allot to photograph lol and for prices i'm just looking for FAIR offers, i don't want to throw done huge number out there and scare everyone off our to small of number and loose my @ss on money. i added more info on the cams.

Sent from my DROID RAZR using Bimmer App

people are just going to want the cams most likely and as most of us know they about 1k new :thumbsup:

325CiMaN 09-26-2012 12:22 AM

Quote:

Originally Posted by Steven747 (Post 14763077)
people are just going to want the cams most likely and as most of us know they about 1k new :thumbsup:

Its highly recommended tho to run the springs if you do bigger cams, just saying, i am willing to sell cams by them selves just would like to see it all leave at same time, and they are not 1k new go to vac motor sports these aren't the little cams these are the mild cams there about 1200 shipped. I my starting offer for cams by themselves is $1000, $1800 for everything ( regarding the cams not misc motor parts)

Sent from my DROID RAZR using Bimmer App

Steven747 09-26-2012 12:34 AM

Quote:

Originally Posted by 325CiMaN (Post 14763173)
Its highly recommended tho to run the springs if you do bigger cams, just saying, i am willing to sell cams by them selves just would like to see it all leave at same time, and they are not 1k new go to vac motor sports these aren't the little cams these are the mild cams there about 1200 shipped. I my starting offer for cams by themselves is $1000, $1800 for everything ( regarding the cams not misc motor parts)

Sent from my DROID RAZR using Bimmer App

yeah thats why i said about.

i believe the 272's are recommended to go in with beefier parts but its just for good measurement with 264's. i would love to have that setup on my car though. 264's are the medium cams 272's are the biggest 1's shrick offer for our cars

anywho glws :thumbup:

325CiMaN 09-26-2012 12:38 AM

Quote:

Originally Posted by Steven747 (Post 14763190)
yeah thats why i said about.

i believe the 272's are recommended to go in with beefier parts but its just for good measurement with 264's. i would love to have that setup on my car though. 264's are the medium cams 272's are the biggest 1's shrick offer for our cars

anywho glws :thumbup:

Thanks man! Ya when i can afford to build another motor i am going to do a hybrid of m54b30 and s52b32 so basically a dual vanos s52b32 but i am going to make as much power n/a as possible with combo of 272 cams and high compression pistons and ITB's

Sent from my DROID RAZR using Bimmer App

325CiMaN 09-26-2012 12:21 PM

Bump

Sent from my DROID RAZR using Bimmer App

325CiMaN 09-26-2012 05:24 PM

7 Attachment(s)
Thermostats sold! I also found some more parts- brand new idler pulley, good hydraulic belt tensioner 300 miles on it, good water pump pulley 300 Miles on it, good power steering resivor, oil filter housing lid x2, good ac belt tensioner with pulley 1000 miles on it, idle air control valve, vacuum canister under intake manifold, secondary air valve,
plus a bunch of misc sensors and pressure switches. Here are some pictures

Sent from my DROID RAZR using Bimmer App

BigDRick323 09-26-2012 05:35 PM

I think I'm going to need that power steering reservoir.

Sent from my VM670 using Bimmer App


All times are GMT -5. The time now is 05:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use