BMW 330ci Rims
 

Hey all, i am thinking about upgrading my rims from 17-19 inch. I was wondering if i do this will there be any rubbing? I have aftermarket Koni suspension in the front and Bilstein shocks in the back.

the wheel sizes are
front 19*8.5+40
rear19*9.5+45
5x114.3

Thanks in advance.

Not to be an ass but use the search tab in these forums. 99% of the time your question has been answered before. Those sizes and offset would fit but bolt pattern won't.

The fitment you selected is correct for the car, however you have the wrong bolt pattern. The BMW fitment is 5x120. The proper fitment for the E46 is the 19x8.5 et.40 and 19x9.5 et.45 if your going to run something like the VMR VB3 which happens to be a fantastic look on the car ;) This will give you a nice flush fitment while not causing any rubbing issues as long as the appropriate tires are run.

http://www.modbargains.com/images/Pr...46-Coupe-2.jpg

http://www.modbargains.com/images/Pr...46-Coupe-1.jpg

+1 :thumbsup:

Thank you all for the help, it is greatly appreciated.